NEW
Font size
WorksheetsColorado Board Laser Cut Project Quiz
Total questions: 50
Worksheet time: 25mins
What should you always do before painting, staining, or using wood glue?
Ignore the instructions
Read the manufacturer's directions
Ask a friend
Use any product you find
Which tool can you use to write your name on your wood project to avoid staining?
Marker
Pencil or tape
Paintbrush
Screwdriver
Where should you save your electronic files for your project?
On a USB drive
In the appropriate folder on the desktop
On your phone
In your email
How many magnets should be placed on the back of the Colorado Flag refrigerator magnet?
One
Two
Three
Four
What should NOT be visible on your finished wood project?
Paint
Wood glue
Your name
Magnets
What is the purpose of writing your name on your project?
To decorate it
To identify your work
To make it heavier
To change its color
What should you do to avoid smudges on the paint?
Touch the paint while wet
Let the paint dry completely
Mix paint with glue
Paint with your fingers
How long does it typically take for wood glue to dry?
5 minutes
30 minutes to 1 hour
1 day
1 week
How long does Rustoleum enamel spray paint usually take to dry before you should handle it?
5 minutes
15-30 minutes
1-2 hours
1 day
How long does wood stain generally take to dry before you should handle it?
10 minutes
2-4 hours
24 hours
1 week
What is the best way to ensure your DXF and CorelDraw files are easy to find?
Name them randomly
Name them accurately
Save them in any folder
Delete them after use
If you want to avoid staining the wood when writing your name on a wooden project, which method should you use?
Write with a marker
Use tape or pencil
Carve your name
Paint your name
When placing two magnets on the back of a refrigerator magnet, what should you consider?
Place them randomly
Measure and place them evenly
Stack them together
Use only one magnet
Why is it important to avoid visible wood glue on your project?
It makes the project stronger
It affects the appearance and quality
It helps the paint dry faster
It makes the magnets stick better
If you notice smudges on your paint, what should you do next time?
Paint faster
Allow more drying time before touching
Use more paint
Ignore the smudges
If you want to reduce waste when laser cutting, what should you do with your files?
Use only new wood
Create separate files for scrap wood
Ignore scrap wood
Use the largest file possible
If you accidentally get wood glue on the surface of your project, what is the best way to fix it?
Paint over it immediately
Wipe it off before it dries
Leave it as is
Add more glue
You are planning to laser cut a project and want to minimize wood waste. What steps should you take before starting?
Use only new wood pieces
Create separate laser files for scrap wood and plan your cuts
Cut randomly
Ignore scrap wood
A student forgot to write their name on their project and electronic files. What problems might this cause?
The project will look better
The project and files may be lost or confused with others
The paint will dry faster
The magnets will not stick
You notice that the magnets on your refrigerator magnet are not evenly placed. What should you do to correct this?
Ignore the placement
Measure and reposition the magnets for even placement
Add more magnets
Remove the magnets
If your paint has smudges after drying, what reasoning can you use to prevent this in future projects?
Paint with thicker layers
Allow sufficient drying time and avoid touching the paint until fully dry
Use a different color
Paint faster
You are organizing your project files and want to ensure they are easy to find later. What strategy should you use?
Name files randomly
Use clear, accurate names and save them in the correct folder
Save all files on the desktop
Delete files after use
A student wants to avoid staining the wood when marking their name. What is the best plan?
Use a permanent marker
Use tape or pencil to mark their name
Paint their name
Carve their name
You are preparing to use wood glue for your project. What should you do to ensure the best results?
Apply glue randomly
Read the manufacturer's directions and apply glue carefully to avoid excess
Use as much glue as possible
Mix glue with paint
If you want to make your project look professional, what steps should you take regarding paint and glue?
Leave glue visible and paint with smudges
Ensure no glue is visible and paint is smooth without smudges
Use extra glue and thick paint
Ignore the appearance
You are working on a group project and need to share files. What is the best way to organize and share your electronic files?
Name files randomly and share via email
Name files accurately and save them in a shared folder
Print all files
Delete files after sharing
You want to reduce waste and improve efficiency in your laser cutting project. What should you do during the planning stage?
Ignore scrap wood and cut only new pieces
Create separate laser files for scrap wood and plan cuts to use all available material
Cut randomly
Use the largest file possible
What is the name of the laser cutting software for the ULS3.60?
DaVinci Lab
Ricoh Science
VLS 3.60
Laser 12X20
What is the name of the laser cutter we have?
Full Spectrum Hobby 12X20
Universal Laser Systems ULS3.60
Makerbot Replicator 2
Shopbot 24X18
When laser cutting a file from Solidworks you need to get it to a _________ file, in order for VLS3.60 software to read it.
SLDPRT
SLDDRW
DXF/PDF
JPG
In our workflow, how do you get a .dxf file into VLS3.60?
File-Open-Find File
Print it from Adobe Illustrator/CorelDraw
Drag it into the Laser
Use a SD card and reader
How do I save a Solidworks part file as a .dxf for laser cutting?
Create the sketch, save as .dxf, clean up lines
Save part file as .dxf after extruding
Export as .dxf
There is no need to save as a .dxf file
What is the maximum size of 1/8" Baltic Birch that can be cut in the laser cutter?
18" X 24"
10" X 12"
12" X 24"
8.5" X 11"
What are the settings in VLS 3.60 if I want to cut through 1/8" Baltic Birch?
It selects it automatically-Choose the correct material in SolidWorks
14% Speed-100% Power-1 Pass
30% Strength- 100% Speed- 2 Passes
30% Speed- 100% Strength-1 Pass
Can I change the color of lines in the VLS3.60 software?
Yes
No
Using our work flow with Corel Draw, how do you start a print?
File, New
File, Open
File, Place
File, Import
The proper laser cutting workflow in the Monarch lab is...
SW Part, SW Sketch, Save AS DXF, Corel Draw, VLS 3.60
SW Part, SW Drawing, Save AS .pdf, print to SW
SW Part, Save AS DXF, print to Full Spectrum
SW Part, SW Assembly, Save AS .pdf, print to Full Spectrum
You should always monitor the laser cutter when it is operating.
Yes, to ensure that there is not a fire.
No, Mr. Stalter watches it.
The laser cutter lid must be closed in order for the laser to work.
True
False
When cutting through the wood, the red lines represent what type of lines?
Raster
Vector
Perimeter
Starting line
Laser files are stored on the computer that operates the laser cutter project be sure to...
Put your name on all files including the Corel Draw file.
not name any files
name your files by project not by name
Before you run the laser file, you must ______ the laser.
Activate
Align the laser with the correct reference point-To Pointer
Focus
Blow up
What should the line thickness of the line be for cutting on the laser?
.072"
Hairline/.001"
72 points
1/8"
What color is used to cut lines on the laser cutter?
Red
R=255 B=0 G=0
Black
Blue
Green
How far should the laser be from the work piece?
1"
2"
.5"
1.5"
What are Adobe Illustrator and CorelDraw designed to do?
edit and design vector graphics
edit and control raster graphics
edit jpgs
operate the laser cutting equipment
DXF files are vector files.
True
False
What materials can our Laser Cutter engrave and cut?
Wood
Acrylic & Glass
Leather & Fabric
All of These
What type of laser cutter do we have?
A CO2 Laser Cutter
Wood and Paper Laser Cutter
High Voltage Laser Cutter
None of these
