WorksheetsFAA Live Session 4 Quiz
Total questions: 10
Worksheet time: 5mins
Name
Class
Date
1.
To make sure that your drone's center of gravity (CG) limits are not exceeded, follow the aircraft loading instructions specified in the
a)
Pilot's Operating Handbook or Drone Flight Manual.
b)
Aircraft Weight and Balance Handbook.
c)
Center of Gravity Website.
2.
If a drone weighs 33 pounds, what approximate weight would the airplane structure be required to support during a 30° banked turn while maintaining altitude?
a)
34 pounds
b)
47 pounds
c)
38 pounds
3.
When establishing a scheduled maintenance protocol, you must:
a)
Bring the drone to a certified mechanic for all inspections/repairs.
b)
Document any repair, modification, overhaul, or replacement of a system component resulting from normal flight operations. This should be accomplished with either a written or on-line maintenance log for each of your sUAS.
c)
Document all repairs with photos and/or video.
4.
If an overloaded fixed-wing drone makes a turn, what is likely to happen?
a)
The drone will stall.
b)
The drone will spin.
c)
The drone's maneuverability will increase.
5.
At what bank angle does the load factor of your aircraft begin to change significantly?
a)
15°
b)
30°
c)
45°
6.
The four forces acting on a drone in flight are
a)
Weight, thrust, power, and drag.
b)
Pitch, roll, yaw, and thrust.
c)
Thrust, drag, weight (gravity), and lift.
7.
When adding payloads to your drone, you should attach them in a way that
a)
Doesn't negatively affect the center of gravity (CG).
b)
Is invisible to your crew members.
c)
Doesn't align with the instructions in your drone manual.
8.
What is a rudder used for on a fixed-wing drone?
a)
Roll
b)
Pitch
c)
Yaw
9.
If a drone weighs 23 pounds, what approximate weight would the drone be required to support during a 60° banked turn while maintaining altitude?
a)
23 pounds
b)
34 pounds
c)
46 pounds
10.
Where must a drone’s serial number be listed when using either standard Remote ID or a broadcast module?
a)
The aircraft’s Document of Compliance
b)
The manufacturer's Method of Compliance
c)
The Certificate of Aircraft Registration
100 %
