WorksheetsTape Measure Quiz
Total questions: 11
Worksheet time: 8mins
Why are tape measures curved?
To measure round objects
To stay straight when extended
To hold nails while measuring
To stay flexible between points
What measurement is shown at the 3rd line after the 5‑inch mark on a standard 16th‑inch tape measure?
5 1/16 inches
5 1/8 inches
5 3/16 inches
5 1/4 inches
What is the purpose of the loose hook at the end of a tape measure?
To extend the measurement by 1/16 inch
To allow accurate inside and outside measurements
To hold the tape in place on wood
To prevent the tape from retracting
A worker measures a board as 8 feet 4 1/2 inches long. In decimal feet, what is this approximately? (1 ft = 12 in)
8.35 ft
8.40 ft
8.45 ft
8.50 ft
To measure a short inside distance (e.g., between studs), what should you do with the tape?
Hook the end over the inside edge
Pull the tape tight from stud centers
Add 1/16 inch to the reading
Use the 1/16 mark at the housing
A room measures 24 ft long by 18 ft wide. What is the floor area in square feet?
42 sq ft
432 sq ft
432 sq yd
4,320 sq in
A building foundation is 50 ft long and 45 ft wide. How many square feet of concrete are needed for the floor?
2,100 sq ft
2,250 sq ft
2,475 sq ft
2,500 sq ft
What is the area of the floor in square yards?
16 square yards
28 square yards
14 square yards
42 square yards
Putting tiles on the floor
perimeter
area
volume
Building a roof
area
perimeter
volume
