Worksheets40-Question Review: Activity 1.1 Measuring Practice
Total questions: 40
Worksheet time: 20mins
(MC) Which tool is NOT listed in the materials for Activity 1.1?
Tape measure
Ruler
Protractor
Yardstick
(MC) On a U.S. customary ruler, the smallest common division shown in the document is:
1/2 inch
1/4 inch
1/16 inch
1/8 inch
(MC) The fraction 6/16 of an inch is equivalent to which simpler fraction?
3/8
1/4
5/16
7/16
(MC) According to the instructions, to convert inches and fractional inches to decimal feet you should:
Multiply inches by 12
Divide inches by 12
Add 12 to the inches value
Subtract 12 from the inches value
(MC) The decimal value for 1/2 inch when converted to feet (in decimal feet) is:
0.500′
0.042′
0.005′
0.250′
(MC) Which of these is a correct decimal equivalent listed in the document?
1/4
1/2
3/4
1
(MC) Table B asks students to convert architectural units to decimal feet and back; which architectural form is shown as an example?
4'-6"
100 in.
7.5 meters
3 yards
(MC) In Table B the architectural entry 4'-6" is represented in decimal feet as:
4.06′
4.5′
5.5′
4.25′
(MC) Which task is NOT part of completing Table C as described?
Estimate the measurement of each item
Measure items to the nearest inch
Record measurements using architectural notation
Paint the measured wall
(MC) For Table D, measurements should be taken to the nearest:
Quarter-inch
Inch
Half-inch
Sixteenth-inch
(MC) If a measured architectural dimension is 7'-1", its decimal-feet approximation used in examples would be shown as:
7.083′
7.010′
7.167′
7.500′
(MC) Which of these is a sample item listed in Table C to be measured?
Height of the desk
Area of the ceiling
Number of windows
Color of the paint
(MC) The floor plan lists the Primary Bedroom dimensions as:
13'-10" x 15'-0"
15'-10" x 15'-0"
10'-5" x 12'-5"
21'-7" x 15'-0"
(MC) To calculate area in square feet from architectural dimensions you must:
Add length and width
Multiply length by width (in decimal feet)
Divide area by 12
Convert feet to inches then add
(MC) The Living Room dimension on the floor plan is:
15'-10" x 15'-0"
13'-10" x 12'-5"
21'-7" x 15'-0"
10'-5" x 11'-5"
(MC) Which conversion rule is explicitly stated for rounding when converting to decimal feet?
Round to the nearest whole number
Round to the thousandths place (X.XXX)
Round to the nearest tenth (X.X)
Do not round
(MC) The document describes hatch marks on a ruler as:
Decoration only
Lines that divide the length and help make accurate measurements
Country of manufacture stamps
Marks for color coding
(MC) 12/16 of an inch is equivalent to:
3/4
2/3
6/8
both A and C
(MC) The combined Kitchen/Dining area dimension given on the floor plan is:
21'-7" x 15'-0"
15'-4" x 30'-8"
52'-0" x 15'-4"
10'-5" x 11'-5"
(MC) Which of the following steps is part of completing Table A?
Multiply fractional inches by 12
Divide the inches and fractional inches by 12
Convert feet to yards
Convert meters to feet
(MC) True or False: The materials list for the activity includes a calculator.
True
False
(MC) True or False: Table C asks students to estimate and then measure items to the nearest half-inch.
True
False
(MC) True or False: Architectural notation uses feet and inches (for example, 7'-1").
True
False
(MC) True or False: The document instructs to round converted decimal feet to the thousandths place.
True
False
(MC) True or False: 8/16 of an inch is the same as 1/2 inch.
True
False
(MC) True or False: Table D requires recording measurements to the nearest half-inch and converting to decimal feet.
True
False
(MC) True or False: The glossary emphasizes that small measurement errors can affect material quantities like carpet or paint.
True
False
(MC) True or False: Table B only converts decimal feet to meters.
True
False
(MC) True or False: The ruler images in the document show divisions in sixteenths of an inch.
True
False
(MC) True or False: To find area in square feet, the document uses length × width after converting to decimal feet.
True
False
(MC) True or False: Table A directs students to put the resulting decimal conversion value into the corresponding column.
True
False
(MC) True or False: The document recommends recording work in the PLTW Gateway Notebook.
True
False
(MC) Fill in the blank converted to a question: The smallest common fractional division shown on the ruler images is how many sixteenths of an inch?
1/16
2/16
3/16
4/16
(MC) Convert this architectural measurement to decimal feet and round to thousandths: 4'-6" = ____ (decimal feet).
4.050′
4.500′
4.060′
4.250′
(MC) Convert 7'-1" to decimal feet rounded to thousandths: ____ .
7.083′
7.010′
7.167′
7.500′
(MC) Write the architectural notation for a measurement of seven feet and three inches: ____ .
7'-3"
7.25'
7"-3'
7-3 ft
(MC) Convert 10'-5" × 11'-5" into decimal feet (length and width to thousandths): ____ × ____ .
10.417′ × 11.417′
10.500′ × 11.500′
10.083′ × 11.083′
10.167′ × 11.167′
(MC) If a student measures an item as 2'-6" in Table C, the example decimal foot result shown is: ____ .
2.500′
2.417′
2.083′
2.050′
(MC) Convert 21'-7" to decimal feet rounded to thousandths: ____ .
21.583′
21.700′
21.167′
21.083′
(MC) Using the floor plan, calculate the area of the Primary Bedroom (13'-10" × 15'-0") in square feet (convert each to decimal feet first, then multiply; round area to nearest whole square foot): ____ sq ft.
200
208
215
198
