2018 IFGC CH 5A Study Flashcard

Front

Masonry chimneys shall be constructed in accordance with the ________________.

Back

International Building Code (IBC)

Front

Factory-built chimneys and vents for solid fuel appliances are regulated by the ____________.

Back

International Mechanical Code (IMC)

Front

An appliance shall not be connected to a flue serving a factory built fireplace unless the appliance is ________________ for such an installation.

Back

listed

Front

For a direct-vent fireplace with a sidewall vent, the vent termination must be a minimum of ______________ inches from the swing of a door.

Back

12

Front

Gas appliance connections to a masonry chimney flue must be at a point not less than ________________inches above the lowest portion of the interior of the chimney flue.

Back

12

Front

Appliance connections to a chimney or vent equipped with a power exhauster shall be made on the ______________ side of the exhauster.

Back

inlet

Front

Masonry chimney flues shall be provided with a cleanout opening having a minimum height of ________________ inches.

Back

6

Front

A listed unvented room heater does not require a vent when the aggregate input rating of all unvented appliances in the room does not exceed ____________Btu/h per cubic foot of the room volume.

Back

20

Front

For vents passing through an attic, the attic insulation shield shall extend at least _____________ inches above the insulation material.

Back

2

Front

To protect vents in a concealed location from physical damage, steel shield plates shall have a minimum thickness of ____________________.

Back

No. 16 gage