7 step process

Front

What machine is used to create a smooth flat face grain using hand blocks?

Back

6 or 8 inch Jointer

Answer explanation

Remember this can only be done with a board that is less then 8 inches in width!

Front

Next we surface the opposite side face grain parallel using the __________.

Back

planner

Front

The 3rd step we use the _________ to create a 90 degree _______ grain.

Back

Jointer, Edge

Front

Using the ___________________ the instructor will rip the stock parallel wider creating a new ____________________

Back

Table saw, edge grain

Front

Joint the ripped ____________________ one time to remove the blade marks on the ___________________ to arrive at the exact _________________

Back

edge grain, Jointer, Width

Front

__________________the best _________________ at a 90 degree angle
the edge and face grain surfaces using the ________________________

Back

Crosscut, end grain, Radial arm saw

Front

Crosscut the finished _________________ at a 90 degree angle to the edge and face grain surfaces on the ________________________

Back

Length, Radial arm saw

Front

What Grain do we make parallel first? Options: Face, Edge, End, Neither

Back

Face

Front

What grain do we make 90 degrees?

Back

Edge

Front

Which is the correct 7 step process? Options: 1. Joint the face 2. plane the face parallel 3. joint best edge grain 4. instructor rips opposite edge 5. joint ripped edge 6. crosscut best end grain 7 crosscut to length , 1. crosscut to length 2. joint best edge 3. rip to width 4. plane face 5. plane face parallel 6. cross cut to length 7. joint ripped edge , not this one, nope

Back

1. Joint the face 2. plane the face parallel 3. joint best edge grain 4. instructor rips opposite edge 5. joint ripped edge 6. crosscut best end grain 7 crosscut to length