Mastering the Drill Press: A Guide to Shop Tool Safety

Mastering the Drill Press

A guide to shop tool safety

Drill Press Safety

• Always wear safety goggles
• Secure workpiece with clamps
• Adjust drill speed for material
• Use a drill press vise for stability
• Keep hands away from moving parts

Multiple Choice

Which of the following is a safety precaution when using a drill press?

• Always wear safety goggles

• Secure workpiece with clamps

• Adjust drill speed for material

• Keep hands away from moving parts

Setting Up the Drill Press

• Choose the right drill bit: Select a bit that matches the size and type of hole you need.

• Secure the workpiece: Use clamps or a vise to hold the workpiece securely in place.

• Adjust the depth stop: Set the depth stop to control the depth of the hole.

• Check the speed and feed rate: Adjust the speed and back out bits as needed.

• Wear safety gear: Always wear safety glasses

Multiple Choice

What should you do to control the depth of the hole when using a drill press?

• Choose the right drill bit

• Secure the workpiece

• Adjust the speed and feed rate

• Set the depth stop

Control the Depth

Trivia: To control the depth of the hole when using a drill press, set the depth stop. This ensures consistent and accurate hole depths. Other important steps include choosing the right drill bit, securing the workpiece, and adjusting the speed and feed rate. Remember, safety first!

Drill Press Safety

• Clear the area: Remove any obstacles or debris that may interfere with the drilling process.

• Keep hands away: Never place hands near the drill bit while it's in motion.

• Remove the KEY: Never leave the key connected to the drill chuck!

Don't leave the KEY in the CHUCK!

​

NO!

NO!

Multiple Select

What are some essential safety measures to take when using a drill press?

• Wear protective gear

• Secure workpiece

• Adjust speed and depth

• Clear the area

• Remove the KEY from the CHUCK