03B. Workshop Processes

​Lesson Objective

​Learn and understand what is required to carry out certain processes within the engineering workshop.

Prepare for P3 & M3 sections of Unit 03B assignment

Success Criteria

​Level	​Criteria
​Enabling	​Know basic types of PPE and what part of the users body they protect. Know the basic steps in each of the listed tasks and recognize the listed machines.
Working at​	​Recognize and know all machines, understand how to use them properly and identify possible challenges when using them. Select appropriate PPE and understand additional steps to ensure safe undertaking of tasks
Exceeding ​	​Safely carry out tasks, identify potential hazards and mitigating these through the correct use of PPE, and planning and preparation. Explain and justify the safety steps which you would implement in each task

Word Cloud

What precautions or equipment could be implemented or used when handling and transporting steel plate and bar

Word Cloud

What challenges might be associated with preparing and marking out steel plate

Word Cloud

What hazards are associated with drilling holes in metal using the pillar drill

Word Cloud

What hazards are associated with operating the lathe, and knurling onto round bar?

Word Cloud

What hazards are associated with milling metal bar

Open Ended

What is the primary hazard when handling steel plates and bars?

Multiple Select

Which PPE is essential when preparing and marking out steel?

• Safety Goggles

• Glove

• Toe Protection

• Hearing Protection

Reorder

Reorder the following points to successfully set up the pillar drill and drill a hole in a piece of mild steel

• Select appropriate PPE and ensuring the drill and work area are clean.

• Secure the steel firmly with a vise or clamps.

• Select a suitable drill bit, set the correct speed, and align the bit over the marked spot.

• Drill with steady pressure without forcing the bit.

• Turn off the drill, wait for it to stop, remove the workpiece, and clean up any debris.

1

2

3

4

5

• 1
• 2
• 3
• 4
• 5

Multiple Choice

What is the main hazard associated with knurling on a metal bar using a lathe?

• Burns from overheating metal
• Risk of entanglement with rotating parts.

• Ejection of the workpiece.

• Injury from excessive coolant

Open Ended

Which PPE should be worn to protect against flying metal chips when drilling?

Success Criteria

​Level	​Criteria
​Enabling	​Know basic types of PPE and what part of the users body they protect. Know the basic steps in each of the listed tasks and recognize the listed machines.
Working at​	​Recognize and know all machines, understand how to use them properly and identify possible challenges when using them. Select appropriate PPE and understand additional steps to ensure safe undertaking of tasks
Exceeding ​	​Safely carry out tasks, identify potential hazards and mitigating these through the correct use of PPE, and planning and preparation. Explain and justify the safety steps which you would implement in each task

• Re-read the criteria and identify what level you have reached in this lesson. How would you improve upon this in your next lesson

Open Ended

What level have reached in this lesson. How would you improve upon this in your next lesson (Enabling/Working at/ Exceeding)