Intro and Safety to Automotive Technology

Multiple Choice

Clothing used to protect you in case of an accident is called...

• Proper Protective Devices

• Personal Protective Equipment

• Gear

• Bling

Multiple Choice

What are some job opportunities available in the automotive technology field?

• Automotive technician

• Service writer

• Mechanical unit repairer

• All of the above

Multiple Choice

What are some opportunities indirectly related to automotive technology?

• Farm equipment technician

• Marine equipment technician

• Aircraft technician

• All of the above

Multiple Choice

What is the recommended frequency for technicians to retake the ASE exam to maintain their certification?

• Every year

• Every 3 years

• Every 5 years

• Every 10 years

Open Ended

List the eight areas in which automotive technicians can be certified according to the National Institute for Automotive Service Excellence (ASE).

Multiple Choice

What is the expected job growth percentage for automotive technicians from 2014 to 2024?

• 5% to 7%

• 7% to 9%

• 9% to 17%

• 17% to 20%

Multiple Choice

According to the Alliance of Automobile Manufacturers, what percentage of systems in a typical vehicle are controlled by electronics?

• 76%

• 86%

• 96%

• 66%

Multiple Choice

What are the common methods used to pay automotive technicians?

• Hourly

• Salary

• Flat Rate

• All of the above

Multiple Choice

When should you wear slip-resistant shoes in the shop?

• Only when handling hot liquids.

• At all times to prevent slips and falls.

• Never; they are not necessary.

Fill in the Blank

Fill in the blank: Slips are particularly dangerous in an automotive workplace because they can lead to ___ injuries.

Multiple Choice

How can you prevent tripping over hoses in the workplace?

• Use cable organizers or covers to keep them tidy and out of the way.

• Keep cables coiled in the middle of the room

Multiple Choice

What is the best way to prevent slips and falls in the kitchen?

• Clean up spills immediately.

• Run quickly through wet areas.

• Wear socks for better mobility.

Multiple Choice

How can you safely use a ladder in the workplace?

• Ensure it is fully open and stable before climbing.

• Climb fast to minimize time on the ladder.

• Use the top step to reach high places.

Multiple Choice

What is the importance of ventilation in a workspace?

• It helps to improve aesthetics

• It provides clean air and removes contaminants

• It is not necessary if windows are open

• It only helps in winter months

Multiple Choice

What should be done to ensure safety in a workspace regarding spills?

• Use drying agents and housekeeping items

• Ignore spills if they are small

• Only clean spills when convenient

• Leave spills for the next shift

Multiple Choice

The most common type of workplace accident is

• not paying attention

• slips, trips, and falls

• goofing around

• caused by someone else

Multiple Choice

Elijah was working in the shop when he accidentally spilled some oil on the floor. He should wipe or mop up the spill ________.

• Now

• as soon as possible

• When he's done his oil change

• After putting away his tools

Fill in the Blank

Exhaust extraction should always be used in ___ spaces.

Multiple Choice

What are the potential effects of carbon monoxide inhalation as described in the text?

• Headaches and nausea

• Dizziness and fatigue

• Coughing and sneezing

• Shortness of breath

Multiple Choice

What is the primary method of general ventilation mentioned in the text?

• Windows and fans

• Air conditioning

• Dehumidifiers

• Air purifiers

Multiple Choice

Carbon monoxide is present in:

• Upholstery materials

• Motor oil

• Gasoline

• An engine’s exhaust gases

Multiple Choice

Which class of fire extinguisher is for Electrical fires ?

• Class A

• Class B

• Class C

• All of the above

Multiple Choice

What should you do if you discover a fire in the c?

• Try to put it out yourself

• Sound the alarm and evacuate

• Call a colleague for help

• Ignore it if it's small

Multiple Choice

What should you do immediately after discovering a fire in your home?

• Open all windows to let the smoke out

• Try to extinguish the fire with water, regardless of its source

• Leave the house and call 911 from a safe location

• Hide in a room far from the fire

Multiple Choice

OSHA The Occupational Safety and Health Administration

requires that Material Safety Data Sheets

be available for all chemicals in the

workplace.

• True

• False

Multiple Choice

What are the key components that must be included in all Material Safety Data Sheets (MSDS)?

• Chemical identity

• Manufacturer information

• Health hazard data

• All of the above

Multiple Choice

How far away from a fire should be when discharging a fire extinguisher?

• 2-4 feet

• 6-10 feet

• 12-15 feet

• 18-20 feet

Multiple Choice

What precautions should be taken when handling chemicals according to the material safety data sheets?

• Eating and drinking is allowed

• Only handle chemicals in a well-ventilated area

• No protective equipment is needed

• Store chemicals near heat sources

Multiple Choice

What does PEL stand for in the context of chemical exposure limits?

• Permissible Exposure Limit

• Personal Exposure Limit

• Potential Exposure Limit

• Primary Exposure Limit

Multiple Choice

______________ outlines which standards employers must follow to meet workplace safety obligations.

• EPA
• USDA
• FEMA
• OSHA

Multiple Choice

What are the safety precautions that technicians should take before operating a vehicle in an automotive facility?

• Check tire inflation

• Adjust mirrors and seats

• Wear a seatbelt

• All of the above

Multiple Choice

This is NOT PPE

• Gloves

• long hair secured

• Safety Glasses

• hoodies with strings

Multiple Choice

An example of PPE is...

• Gloves

• Hat

• Safety glasses

• All of the above

Open Ended

What does SRS stand for in automotive safety?

Multiple Choice

What precautions should technicians take when working with high voltage systems in vehicles?

• Always wear gloves

• Keep doors open

• Identify hazards and follow procedures

• Ignore safety protocols

Open Ended

What should be done to prevent spills from leaking into storm drains?

Multiple Choice

What are the best practices for managing spills in the workplace?

• Using absorbents

• Ignoring spills

• Cleaning with water

• Storing chemicals together

Fill in the Blank

Fill in the blank: Absorbents should be treated as ___ waste if they have been used to absorb hazardous chemicals.

Multiple Choice

What should be done immediately after a spill occurs in the workplace?

• Ignore it and continue working

• Clean it up immediately

• Wait for someone else to handle it

• Report it to a supervisor

Multiple Choice

What precautions should be taken when handling refrigerants?

• Wear appropriate PPE

• Do not wear gloves

• Avoid using recovery equipment

• Handle without training

Fill in the Blank

Fill in the blank: The EPA monitors and regulates the handling of ___-depleting substances.

Multiple Choice

What is the environmental impact of chlorofluorocarbons (CFCs)?

• They are harmless to the environment

• They deplete the ozone layer

• They improve air quality

• They are used in food preservation

Multiple Choice

What should be done when a large spill occurs?

• Notify coworkers immediately

• Ignore the spill

• Wait for someone else to handle it

• Clean it up without precautions

Multiple Choice

Different refrigerants may be mixed in a single recovery cylinder

• any time you don't know what refrigerant you are recovering.

• as long as you mark the cylinder with the name of each refrigerant.

• never.

• only if the refrigerant is going to be reclaimed.

Multiple Choice

What should technicians do before installing aftermarket catalytic converters?

• Check warranty expiration

• Consult the EPA

• Remove old converters

• Install new exhaust systems

Multiple Choice

What is the purpose of catalytic converters in vehicles?

• To increase fuel efficiency

• To reduce emissions from tailpipes

• To improve engine performance

• To enhance vehicle speed

Multiple Choice

What are the risks associated with inhaling asbestos dust?

• Skin irritation

• Lung cancer and mesothelioma

• Respiratory infections

• Allergic reactions

Multiple Choice

What precautions should be taken to reduce the risk of asbestos inhalation during brake washing?

• Using hand tools instead of power tools

• Blowing asbestos dust off surfaces

• Using regular air filtration systems

• Wearing regular masks

Multiple Choice

Which is a type of waste that is considered hazardous due to their characteristics.

• Ignitable Waste

• Corrosive Waste

• Reactive Waste

• Toxic Chemicals

• All the above

Multiple Choice

What are the characteristics of hazardous wastes as defined by the Environmental Protection Agency?

• Solid

• Liquid

• Gaseous

• All of the above

Fill in the Blank

Fill in the blank: Solvents should be stored in compatible containers with a lid and kept ___.

Open Ended

What should technicians wear when using solvents?

Multiple Choice

What are the potential health effects of exposure to toluene?

• Nerve damage

• Memory loss

• Kidney damage

• All of the above

Multiple Choice

What are the potential health risks associated with exposure to diisocyanates?

• Skin irritation

• Respiratory sensitization

• Cancer

• All of the above

Multiple Choice

What are the preferred methods for recycling used antifreeze?

• Closed Loop System

• Non-closed System

• Contracted Services

• All of the above

Multiple Choice

What hazardous materials are contained in used batteries?

• Lead battery acid

• Sulfuric acid

• Both lead battery acid and sulfuric acid

• None of the above

Multiple Choice

What should be done with used oil to prevent environmental contamination?

• Recycle it

• Burn it without precautions

• Mix it with hazardous materials

• Store it in any container

Multiple Choice

What are the precautions that should be taken when handling lead acid batteries?

• Wear safety glasses and gloves

• Store batteries in a leak-free tub

• Keep batteries away from drains

• All of the above

Multiple Choice

What are the general rules for using chemicals in cleaning and lubrication?

• Always wear gloves

• Use chemicals in a well-ventilated area

• Mix different chemicals for better results

• Store chemicals in direct sunlight