welding 2 inspections

The dimensional accuracy of a weld is first checked using _____ examination.

• radio-graphic 
• liquid penetrate 
• visual 
• ultrasonic

A groove is melted into the base metal beside the weld in the condition called ____.

• cracking 
• liquid penetrate 
• under cut
• incomplete fusion 

The presence of voids or empty spots in the weld i called _____.

• inclusions

• liquid penetrate

• arc strike

• undercut

The private organization that does not actually prepare standards, but instead adopts standards that it determines are of value to the public interest is called the ____.

• American Welding Society (AWS)
• liquid penetrate 
• American National Standards Institute (ANSI)
• American Petroleum Institute 

In a typical ASME welder qualification test using an open root if F# electrodes are used all the way out the welder qualifies on ___________on both plate and pipe 

• radiographic 
• F3 and F4 electrodes
• all electrodes
• F3 electrodes only 

Essential variables identified by a welding procedure specification (WPS) are items that cannot be changed without __________

• site manager approval
• requalifying the welder
• supervisor approval
• requalifying the welding procedure

The specifications for acceptable welding and brazing filler metals and fluxes (part C) are contained in Section ______ of the American Society of Mechanical Engineers (ASME) boiler ad Pressure Vessel Code (BPVC).

• II
• IX
• I
• V

A complete set of fillet weld gauges includes seven individual blade gauges that can measure _____ different weld sizes.

• 11

• nine

• five

• 7

An example of a nonessential variable identified by a WPS is _____.

• joint design
• travel speed
• material thichness
• welding process

The number/ letter designator for fillet welding on a plate in the flat portion is ______. 

• 3G
• 3F
• 1F
• 1G