Sawstop Table Saw Safety Test

The saw blade should be raised _______ above the stock.

• as high as possible
• no more than 1/8"
• 1/2"
• 1"

The material edge held against a fence or miter gauge should be __________.

• straight
• curved
• cracked and loose
• splintered

Be sure the blade ___________ the throat plate, the fence, or the guard before the power is turned on.

• touches
• cuts
• does not contact
• rubs against

Clamp stop blocks to the table to prevent ________ before lowering the material into the blade.

• blade dulling
• sawdust build-up
• splitting
• kickbacks

Do not use a ________ blade.

• dull
• sharp
• combination
• dado

________ is not permitted on the table saw.

• Ripping
• Cross cutting
• Resawing
• Dadoing

It is unsafe to cut ________ on the table saw.

• flat stock
• round stock
• square stock
• long stock

Do not use both the rip fence and the _________ at the same time while cutting stock.

• dado head
• guard
• push stick
• miter gauge

Clamp a clearance block to the fence for a stop block when using the __________ to make multiple cuts of the same length.

• push stick
• miter gauge
• combination blade
• feather board

Use a push stick when ripping material less than ________.

• 4" wide
• 12" wide
• 1" wide
• the fence height