Phase4mod1 Legislation

Regulation 33 Gives details of tests that must be carried out following the installation of a gas appliance. Which of the following procedures is not required under that regulation.

• The working pressure is tested.

• The flame supervision device is operating satisfactorily.

• The appliance efficiency is above 80%.

• The flue is operating satisfactorily.

Which Regulation compels the gas operative who carries out any work on a gas installation to take action to inform the user and responsible person if a fault appliance is suspected?

Landlords must, under the regulations, have all gas appliances and installation pipework safety checked annually. In addition to this must:

• Replace appliances every five years.

• Carry out efficiency checks on appliances every five years.

• Keep records of the safety checks carried out.

• Only install room sealed appliances since January 1998.

Where a person performs work in relation to a gas appliance, they must immediately examine among other things , the effectiveness of the flue system, if the flue is found to be faulty, the action which the Regulation require to be taken is:

• Notify the owner of the appliance only.

• Notify the gas transporter.

• Disconnect the appliance and leave a warning notice.

• Notify the responsible person and where different, the owner, of the appliance.

Under Regulation 30(1) appliances which are not room sealed must not be fitted in a:

• Garage.

• Conservatory.

• Bathroom.

• Toilet.

Regulation 7(1) is dealing with the subject of:

• Soldering.

• Clipping.

• Sleeving.

• Wrapping.

Which Regulation states that used gas appliances must be inspected to ensure that they are in a safe condition prior to installation?

Which of the following Gas Safety Regulations compels the operative to use a temporary continuity bond where necessary?:

• Regulation 5.

• Regulation 10.

• Regulation 18.

• Regulation 26.

To Comply with the Gas Safety Regulations, the gas operative must, Following the installation of Pipework, purge the supply. However, if the supply is not put into immediate use:

• The installation should be left turned off and connections left open for installation of appliances.

• The installation Labelled and the gas transporter notified.

• The installation Left on, with all outlets sealed with appropriate fittings.

• The installation should only be purged when the installation is to be used immediately.

A gas operative, following the installation of pipework, does not test for tightness until after the pipes have been painted. Which Regulation has been contravened?

• Regulation 6(1)

• Regulation 7(3).

• Regulation 19(2).

• Regulation 22(1).