Template yang digunakan untuk memulakan projek baru Revit Architecture?

Bagaimana melukis grid?

• Architecture Tab > Datum

• Architecture Tab > Datum > Grid

• Architecture Tab > Datum > Grid > Place grid

• Architecture Tab > Datum > Grid > Pick lines

Bagaimana melukis dinding?

• Architecture > Build > Wall > Generic 200mm

• Architecture > Build > Wall > Generic 200mm > Edit Type > Duplicate > Generic - 150mm > Structure > Edit > > Thickness > 150 > enter > OK > Click Wall to wall boundary

• Architecture > Build > Wall > Generic 150mm

• Architecture > Build > Wall > Generic 200mm > Edit Type > Duplicate > Generic - 100mm > Structure > Edit > > Thickness > 100 > enter > OK > Click Wall to wall boundary

Bagaimana melukis lantai?

• Architecture > build > floor > Floor Generic 100mm

• Architecture > build > floor > Floor Generic 100mm > Offset: 0 mm > Extend into wall (to core) > base offset : (0-apron & bath)

  (50 - lantai dlm rumah) > Panel Draw > Pick Walls > Klik dinding sebelah dalam

• Architecture > build > floor > Floor Generic 150mm

• Architecture > build > floor > Floor Generic 150mm > Offset: 0 mm > Extend into wall (to core) > base offset : (0-apron & bath)

  (50 - lantai dlm rumah) > Panel Draw > Pick Walls > Klik dinding sebelah dalam

Bagaimana lukis tingkap?

• Architecture > Build > Window >

• Architecture > Build > Window > pilih window type > pilih size

  > letak window di tempat yang dikehendaki

• Architecture > Build > Window > modify /place window > load family > US Metric > pilih window type > pilih size > letak window di tempat yang dikehendaki

• Architecture > Build > Window > modify /place window

Bagaimana melukis pintu?

• Architecture > Build > Door > modify/place > door >

• Architecture > Build > Door > modify/place > door > load family > US Metirc > pilih door type > pilih door size > letak door di tempat yang dikehendaki

• Architecture > Build > Door >

• Architecture > Build > Door > pilih door type > pilih door size

  > letak door di tempat yang dikehendaki

Bagaimana melukis siling?

• Floor plan > Ceiling > Level 1 > Architecture > Build > Ceiling > Automatic Sketch

• Architecture > Build > Ceiling > Automatic Sketch

• Floor plan > Ceiling > Level 2 > Architecture > Build > Ceiling > Automatic Sketch

• Architecture > Build > Ceiling >

Bagaimana melukis bumbung?

• Architecture > Build > Roof > Picklines > Offset 900

• Floor Plan > Level 1 > Architecture > Build > Roof > Overhang : 900> Tick Extend to wall/core > Pilih rectangle > pilih sempadan bumbung >

• Architecture > Build > Roof >

• Floor Plan > Level 2 > Architecture > Build > Roof > Overhang : 900> Tick Extend to wall/core > Pilih rectangle > pilih sempadan bumbung >

Bagaiman menyunting (edit) lantai?

• Select floor yang berkenaan> Edit boundary > edit kawasan> click green tick

• Edit boundary > edit kawasan> click finish

Bagaimana menyunting (edit) rekabentuk bumbung

• edit footprint > click green tick

• Select roof yang berkenaan > edit footprint > matikan tick pada Define Slope pada dua arah bertentangan > click green tick