The existing installation in a hotel is to be inspected and tested as a requirement of the local authority for a public entertainment licence application. Previous inspection and testing records exist but two additional socket-outlet circuits have previously been installed for which there are no test results available. Where must the Extent and Limitations of inspection and testing be recorded?

b) Generic Schedule of Test Results.

d) Periodic Inspection Report Certificate.

The existing installation in a hotel is to be inspected and tested as a requirement of the local authority for a public entertainment licence application. Previous inspection and testing records exist but two additional socket-outlet circuits have previously been installed for which there are no test results available. Who will be involved in setting the sampling size for this installation?

d) Inspector, Client and Local Authority.

b) Client, Local Authority and HSE.

c) HSE, Inspector and Local Authority.

The existing installation in a hotel is to be inspected and tested as a requirement of the local authority for a public entertainment licence application. Previous inspection and testing records exist but two additional socket-outlet circuits have previously been installed for which there are no test results available. What action should be taken with regard to the additional socket-outlet circuits?

c) Both should be fully tested to check compliance with BS 7671.

a) Both should be sampled to check compliance with BS 7671.

b) One should be sampled to check compliance with BS 7671.

d) One should be fully inspected to check compliance with BS 7671.

The existing installation in a hotel is to be inspected and tested as a requirement of the local authority for a public entertainment licence application. Previous inspection and testing records exist but two additional socket-outlet circuits have previously been installed for which there are no test results available. Which test can be carried out without the use of GS38 compliant test leads?

d) Continuity of protective conductors.

The existing installation in a hotel is to be inspected and tested as a requirement of the local authority for a public entertainment licence application. Previous inspection and testing records exist but two additional socket-outlet circuits have previously been installed for which there are no test results available. Which test may be unnecessary on any existing ring-final circuits, for which previous test records are available?

c) Ring-final circuit continuity.

The continuity of a main protective bonding conductor to a gas installation pipe in a new primary school is to be tested. The 10 mm 2 conductor is 43 m long. The installation has been safely isolated for this test. What is the purpose of carrying out this test?

b) To confirm a requirement of ADS has been met.

a) To confirm electrical separation has been met.

c) To confirm exposed conductive parts are earthed.

d) To confirm extraneous conductive parts are present.

The continuity of a main protective bonding conductor to a gas installation pipe in a new primary school is to be tested. The 10 mm 2 conductor is 43 m long. The installation has been safely isolated for this test. What instrument is to be used to carry out this test?

b) Insulation resistance tester.

d) Prospective fault current tester.

The continuity of a main protective bonding conductor to a gas installation pipe in a new primary school is to be tested. The 10 mm 2 conductor is 43 m long. The installation has been safely isolated for this test. Why must the installation remain safely isolated whilst this test is carried out?

d) To remove the risk of electric shock.

c) To ensure accurate test results.

Voltage drop of a single-phase circuit supplying a bread oven is to be verified as part of periodic inspection and testing within a bakery. The circuit has a measured R1+Rn value of 0.40 Ω and an Ib of 29.6 A. The circuit protective device has an In of 32 A. The installation forms part of a public 400/230 V TN-S system. What is the purpose of this test?

c) To confirm the function of the oven will not be impaired.

a) To confirm the oven will not overload the circuit.

b) To confirm the protective device will operate correctly.

d) To confirm the cable will stay within temperature parameters.

The supply polarity of a restaurant is to be tested as part of a periodic inspection and test. The supply and installation form part of a 230 V single-phase TN-S system. Fault protection is provided by single-pole circuit breakers to BS EN 60898. What would be the effect of reversed Line-Neutral supply polarity?

d) Circuit breakers will not disconnect an earth fault

a) Motors will spin in reverse direction

b) Equipment will not function correctly.

c) Single-pole switches will not control the load.

The supply polarity of a restaurant is to be tested as part of a periodic inspection and test. The supply and installation form part of a 230 V single-phase TN-S system. Fault protection is provided by single-pole circuit breakers to BS EN 60898. What instrument is used to carry out this test?

b) Phase rotation test instrument.

d) Insulation resistance tester.

The supply polarity of a restaurant is to be tested as part of a periodic inspection and test. The supply and installation form part of a 230 V single-phase TN-S system. Fault protection is provided by single-pole circuit breakers to BS EN 60898. What instrument safety check must be made before carrying out this test?

c) Check operation on a proving unit.

d) Check instrument within calibration.

The supply polarity of a restaurant is to be tested as part of a periodic inspection and test. The supply and installation form part of a 230 V single-phase TN-S system. Fault protection is provided by single-pole circuit breakers to BS EN 60898. What voltages are to be expected if the polarity is correct?

a) L-N 230 V, L-E 230 V, N-E Zero V

b) L-N Zero V, L-E Zero V, N-E 230 V

c) L-N 230 V, L-E Zero V, N-E Zero V

d) L-N Zero V, L-E 230 V, N-E 230 V

The supply polarity of a restaurant is to be tested as part of a periodic inspection and test. The supply and installation form part of a 230 V single-phase TN-S system. Fault protection is provided by single-pole circuit breakers to BS EN 60898. Why may the testing of circuit polarity be unnecessary?

b) Additions have been installed.

c) High Zs value has been recorded.

d) Alterations have been carried out.

Periodic inspection and testing of a mobile catering unit is to be carried out as a requirement of the client’s insurer. The supply is from a 3 kVA 230 V single-phase portable generator and is connected as a TN-S system with fault protection provided by a BS EN 61008 30 mA RCD. The catering unit is permanently sited and infrequently moved. What would this information help the inspector to determine?

b) The amount of sampling required.

a) The condition of the cables.

c) The number of RCD tests required.

d) The number of circuits to be tested.

Periodic inspection and testing of a mobile catering unit is to be carried out as a requirement of the client’s insurer. The supply is from a 3 kVA 230 V single-phase portable generator and is connected as a TN-S system with fault protection provided by a BS EN 61008 30 mA RCD. What needs to be verified with regard to the mobile catering consumer unit?

c) The top horizontal surface complies with IP4X.

a) The RCD main switch is rated at ≥ 63 A.

b) The enclosure is made of polycarbonate.

d) The bottom horizontal surface complies with IP4X.

Periodic inspection and testing of a mobile catering unit is to be carried out as a requirement of the client’s insurer. The supply is from a 3 kVA 230 V single-phase portable generator and is connected as a TN-S system with fault protection provided by a BS EN 61008 30 mA RCD. What additional action must the inspector take regarding this observation?

a) Inform the client in writing without delay. .

b) Inform the insurer in writing without delay.

c) Remove the portable generator until fault fixed.

d) Isolate the installation and prevent re-energising

Insulation resistance has been tested on five new lighting circuits in an existing large distribution warehouse. These circuits are supplied from a new single-phase, five-way DB. Switching for each circuit is by 230 V contactors. Connection to each light is made using a BS 1363 socket-outlet adjacent to the fitting. The supply and installation form a 400 V three-phase TN-C-S system. What is the correct way to prepare one of these circuits for testing?

c) Bypass contactors, connect cpc, un-plug lights.

a) Switch on lights, connect cpc, un-plug lights.

b) Switch on lights, disconnect cpc, plug-in lights.

d) Bypass contactors, disconnect cpc, plug-in lights.

Insulation resistance has been tested on five new lighting circuits in an existing large distribution warehouse. These circuits are supplied from a new single-phase, five-way DB. Switching for each circuit is by 230 V contactors. Connection to each light is made using a BS 1363 socket-outlet adjacent to the fitting. The supply and installation form a 400 V three-phase TN-C-S system. What affects the insulation resistance of each circuit tested?

c) The number and length of conductors.

a) The csa and number of conductors.

b) The csa and purpose of conductors.

d) The number and the purpose of conductors.

Insulation resistance has been tested on five new lighting circuits in an existing large distribution warehouse. These circuits are supplied from a new single-phase, five-way DB. Switching for each circuit is by 230 V contactors. Connection to each light is made using a BS 1363 socket-outlet adjacent to the fitting. The supply and installation form a 400 V three-phase TN-C-S system. What condition can be detected during the insulation resistance test?

b) De-rating of cable insulation.

c) Degradation of cable insulation.

d) Deterioration of cable insulation.

Insulation resistance has been tested on five new lighting circuits in an existing large distribution warehouse. These circuits are supplied from a new single-phase, five-way DB. Switching for each circuit is by 230 V contactors. Connection to each light is made using a BS 1363 socket-outlet adjacent to the fitting. The supply and installation form a 400 V three-phase TN-C-S system. What would be the most appropriate action to take if the result for lighting circuit 1 is 0.95 MΩ between live conductors?

a) Investigate lighting circuit 1 between Line-Neutral.

b) Investigate lighting circuit 1 between Line-Earth.

c) Record the result as a non-compliance.

d) Record the result as acceptable.

A section of galvanised trunking is to be inspected as part of periodic inspection and testing of a factory. The trunking contains unsheathed low voltage cables. What is the most likely reason for carrying out this periodic inspection?

c) New occupiers have purchased the building.

a) New trunking has been installed.

b) New contractors have been appointed.

d) New cables have been installed in the trunking.

Continuity of a ring final circuit has been tested as part of an initial verification of a new primary school. All the socket-outlets are connected directly to the ring. The circuit loop length is 58 m long, wired in 4 mm2 live and 1.5 mm 2 cpc flat profile cable. The circuit is protected by a 32 A BS EN 60898 Type B circuit breaker. Which test would detect incorrect polarity of the Live conductors at each socket-outlet?

d) Line-Earth at each socket-outlet

a) Line-Neutral at each socket-outlet.

b) Line-Earth at the distribution board.

c) Line-Neutral at the distribution board.

2391-52

Authored by Chris Falet

Other

1st - 10th Grade

CCSS covered

Used 11+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

60 questions

Show all answers

MULTIPLE CHOICE QUESTION

5 mins • 1 pt

What needs to be verified during the inspection of a new installation?

a) Electrical equipment has not degraded.

b) Fixed installation is correctly selected.

c) Fixed installation has not deteriorated.

d) Electrical appliances comply with BS 7671.

MULTIPLE CHOICE QUESTION

5 mins • 1 pt

What process involves checking if an installation has deteriorated?

a) Initial Verification.

b) Condition Inspection.

c) Initial Inspection and Testing.

d) Periodic Inspection and Testing.

MULTIPLE CHOICE QUESTION

5 mins • 1 pt

What document must be issued following the installation of a new cooker circuit to an existing installation?

a) Electrical Installation Report.

b) Electrical Installation Certificate.

c) Electrical Installation Condition Report.

d) Minor Electrical Installation Works Certificate.

MULTIPLE CHOICE QUESTION

5 mins • 1 pt

What circumstance would require an Electrical Installation Condition Report to be issued?

a) New luminaires have been installed.

b) Supermarket has been rewired.

c) New occupier moving into a flat.

d) Remedial work has been carried out

MULTIPLE CHOICE QUESTION

5 mins • 1 pt

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4m above the pool. What document must be completed following inspection and testing?

a) Electrical Installation Certificate.

b) Schedule of Electrical Condition.

c) Electrical Installation Condition Report.

d) Minor Electrical Installation Works Certificate.

MULTIPLE CHOICE QUESTION

5 mins • 1 pt

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4m above the pool. Which non-statutory document directly relates to the process of inspection and testing?

a) EWR

b) GN3

c) GS38

d) ESQCR

MULTIPLE CHOICE QUESTION

5 mins • 1 pt

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4m above the pool. What document must the Inspector use to record the new lighting circuit reference method?

a) Schedule of Test Results.

b) Schedule of Inspections.

c) Electrical Installation Schedule.

d) Electrical Installation Certificate.

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

57 questions

Weather- ESL 3

Quiz

•

KG - Professional Dev...

63 questions

Transmission Level 3

Quiz

•

10th Grade - University

60 questions

TES SELEKSI PPDB SMP MAMBA'UL HISAN 2024/2025

Quiz

•

6th - 8th Grade

60 questions

Latihan PMR Madya Candradimuka

Quiz

•

1st Grade - University

55 questions

Global 2ª evaluación 2º trimestre

Quiz

•

8th Grade

56 questions

UJIAN AKHIR SEMESTER

Quiz

•

7th Grade

65 questions

LA MÚSICA EN LA EDAD MEDIA

Quiz

•

9th Grade

60 questions

7th Grade EOC Review

Quiz

•

6th - 8th Grade

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

54 questions

Analyzing Line Graphs & Tables

Quiz

•

4th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

Discover more resources for Other

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

54 questions

Analyzing Line Graphs & Tables

Quiz

•

4th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

2391-52

What needs to be verified during the inspection of a new installation?

What process involves checking if an installation has deteriorated?

What document must be issued following the installation of a new cooker circuit to an existing installation?

What circumstance would require an Electrical Installation Condition Report to be issued?

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4m above the pool. What document must be completed following inspection and testing?

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4m above the pool. Which non-statutory document directly relates to the process of inspection and testing?

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4m above the pool. What document must the Inspector use to record the new lighting circuit reference method?

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4m above the pool. What would be the most appropriate human sense to use when inspecting the IP rating of the new lights?

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4 m above the pool. What is the minimum IP rating required for the new lights?

Refurbishment of a leisure centre with a swimming pool is taking place. An additional lighting circuit is to be installed. The new lights will be at a height of 2.4 m above the pool. What would be the most appropriate action to take if the new lights do not comply with the minimum IP rating?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Other