POP QUIZ FINAL

The torque wrench measures 15 inches from the center of its handle to the center of its square ……………

• ADAPTER

• ADEP

• ENGINE

• DEEP

The turbine engine, being cylindrical in shape, has many bolt-ring …………..

• SETS

• CREATION

• CREATIONS

• CREATURE

In order to ………… run engine and check its performance on any given day and have meaningful data, all instrument readings are corrected to Standard Day conditions

• TEST

• LEMON

• LEMON

• LEMONADE

After manufacture or heavy repair, the engine generally requires an integrity check in a …………….. test facility.

• SPECIFIC

• COCONUT

• COCONUTS

• COKE

The ……………… usually specifies the torque to apply and the torqueing procedure to use.

• MANUFACTURER

• MANUFAKYURER

• MANAPLASMA

Care must be taken to select only the correct type and diameter ……………. as recommended by the manufacturer.

• LOCKWIRE

• KEY

• KEYLOCK

• SOUL

The wire should not be ……………… as it work- hardens and could break during service.

• OVER-LIGHTENED

• OVERALL

• OVER SOFT

The twisting for 0.032-inch lock wire is usually recommended at 8 to 10 twists per inch and for 0.041-inch diameter lock wire, …………….. per inch.

• 6 to 8 TWISTS

• 600 to 800 TWISTS

• 60 to 80 TWISTS

• 62 to 82 TWISTS

The factory supplied module reportedly provides a better product with an ………………. service life.

• INCREASED

• INCUBED

• INCUBE

While reciprocating engines have a visible ………………, gas turbine engine vibration limits are along the order of only 3 to 5 thousandths of and a special engine- mounted detector called a vibration transducer.

• VIBRATION characteristic

• VIBRANIO

• VIBRACIONES