The relation between linear velocity and angular velocity

• r = v⍵

• ⍵ = vr

• v = r⍵

• a = v⍵

The unit of angular velocity is

• m/s

• m/s²

• rad/s

• rad/s²

A wrench is used to tighten a nut. A 15N perpendicular force is applied 50cm away from the axis of rotation, and moves a distance of 10 cm as it turns. What is the torque applied to the wrench?

• 7.5 Nm
• 1.5 Nm
• 750 Nm
• 150 Nm

The easiest way to open a heavy door  is by applying the force

• Near the hinges
• In the middle of the door
• At the edge of the door far from the hinges
• At the top of the door

What is the Unit for Torque

• Nm
• N
• W
• J

If the torque required to loosen a nut on the wheel of a car has a magnitude of 60.0 N• m, what minimum perpendicular force must be exerted by a mechanic at the end of a 45.0 cm wrench to loosen the nut?

• .666 Nm
•  133.3 N
• 66.7 N
• 13.3 Nm

Find the magnitude of the torque produced by a 5.0 N force applied to a door at a perpendicular distance of 65 cm from the hinge.

• 75 Nm
• 3.25 Nm
• 6.3 Nm
• 8.75 Nm

Which kind of movement is depicted in the picture?

• Rotary
• Linear
• Oscillating
• Reciprocating

Tags

NGSS.HS-PS2-1

The figure shows scale drawings of four objects, each of the same mass and uniform thickness, with the mass distributed uniformly. Which one has the greatest moment of inertia when rotated about an axis perpendicular to the plane of the drawing at point P?

• A
• B
• C
• D

Two uniform solid balls, one of radius R and mass M, the other of radius 2R and mass 8M, roll down a high incline. They start together from rest at the top of the incline. Which one will reach the bottom of the incline first?

• The small sphere arrives first.
• The large sphere arrives first.
• Both reach the bottom at the same time.

Tags

NGSS.HS-PS3-1

NGSS.HS-PS3-2