FORMATIVE TEXT PROCEDURE TEXT MANUAL

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

What is the goal of the text?

• How to use a hand mixer

• How to use a microwave

• How to use a rice cooker

• How to use a blender

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

What is the fifth step on the text above?

• Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

• Unplug the mixer by pulling the cable off from the socket.

• Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

• When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

How to use a hand mixer

1. Make sure that the mixer is unplugged and the speed is on low before you insert the beaters.

2. Plug the mixer using your cable to the socket. Also, it is time to place the beater into a bowl.

3. Slowly use the speed control button to set your desired speed. Start with 1 and then slowly increase it to your desired speed.

4. When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

5. Unplug the mixer by pulling the cable off from the socket.

6. Eject the beater that you installed. Each mixer has a different procedure of removing beaters. Read your manual to understand your method. Make sure that the speed is set to 0 before you try this step.

Which statement is TRUE based on the text above?

• We have turn the speed up to high before you unplug the mixer.

• Each mixer has a same procedure of removing beaters.

• We don't have to read the manual.

• When you are done mixing, make sure to turn the speed down to low before you unplug the mixer.

How To Call Person

If you want to call the other persons, follow the instructions below:

Press the “power” button.

Search the name of the person that you want to call in contact list or press the number you want to call

Press the call button (green button)

Wait until the other accept your call Start the conversation.

Press the “Call Off” button to end the conversation (red button)

What we must do if we want to end the conversation ?

• Press the call button

• Press the green button

• Press the "power" button

• Press the red button

How To Call Person

If you want to call the other persons, follow the instructions below:

Press the “power” button.

Search the name of the person that you want to call in contact list or press the number you want to call

Press the call button (green button)

Wait until the other accept your call Start the conversation.

Press the “Call Off” button to end the conversation (red button)

How many instructions in the text above?

• 2

• 3

• 4

• 5

The best arrangement of the steps below are ...

HOW TO USE MICROWAVE

(1) Don’t forget to wash hands after cleaning the working area.

(2) Press the button to start heating the food.

(3) Finally, take out the food and enjoy it.

(4) Don’t forget to decide how long it will heat the food.

(5) Wait for the beep sound. It indicates the cooking process is done.

(6) Put the food into the microwave.

• 2-6-4-5-3-1

• 6-2-5-4-3-1

• 6-2-3-1-4-5

• 6-2-4-5-3-1

How to save videos from Instagram

First, open the Instagram app.

Second, open the story or video you want to save.

Third, tap its corresponding menu button (located in the lower right-hand corner, represented by 3 dots)

Next, when the pop-up menu appears, tap Save or Save Photo/Video.

What is the last step?

• Open the Instagram app.

• Open the story or video you want to save.

• Tap its corresponding menu button (located in the lower right-hand corner, represented by 3 dots)

• When the pop-up menu appears, tap Save or Save Photo/Video

How to save videos from Instagram

First, open the Instagram app.

Second, open the story or video you want to save.

Third, tap its corresponding menu button (located in the lower right-hand corner, represented by 3 dots)

Next, when the pop-up menu appears, tap Save or Save Photo/Video.

The followings are methods how to save videos from Instagram, except...

• Open the story or video you want to save.

• Open the Instagram app.

• Tap its corresponding menu button (located in the lower right-hand corner, represented by 3 dots)

• When the pop-up menu appears, tap Send Photo/Video

HOW TO CLEAN A REFRIGERATOR

1. Remove all frozen foods and ice cube trays. If you have a second refrigerator, use it to temporary store these items. If not, put the food in a cardboard box and cover it with newspaper. Dump the ice cubes.

2. Removes all other food stuff and place on your kitchen counter or in cardboard boxes.

3. Either turn the temperature control "defrost" or unplug the electricity to the refrigerator (or both).

4. Never scrape or jab at the ice with a sharp instrument. You may cause serious damage to the freezing unit. Allow it to melt.

5. Either put a flat pan under the freezer to catch the drips or put a large towel in the bottom of the refrigerator.

What should we do after turn the temperature control "defrost"?

• Scrape the ice with a sharp instrument

• Remove all other food stuff

• Remove all frozen foods and ice cube trays

• Allow the ice to melt

HOW TO CLEAN A REFRIGERATOR

1. Remove all frozen foods and ice cube trays. If you have a second refrigerator, use it to temporary store these items. If not, put the food in a cardboard box and cover it with newspaper. Dump the ice cubes.

2. Removes all other food stuff and place on your kitchen counter or in cardboard boxes.

3. Either turn the temperature control "defrost" or unplug the electricity to the refrigerator (or both).

4. Never scrape or jab at the ice with a sharp instrument. You may cause serious damage to the freezing unit. Allow it to melt.

5. Either put a flat pan under the freezer to catch the drips or put a large towel in the bottom of the refrigerator.

"Allow it to melt" (step 4). The word "it" refers to ...

• The food

• The ice

• The freezing unit

• The refrigerator