MV Test 1 EP

which government agency is responsible for managing and legislating the MOT testing service standards?

• Driver and Operator Standards Agency

• Vehicle and Operating Standards Agency

• Vehicle and Driver Services Agency

• Driver and Vehicle Standards Agency

What type of switch is commonly used to operate electric windows?

• Rotary

• Lever

• Push

• Rocker

Which unit of electricity is used to measure resistance in an electric circuit

• Voltage

• Ohms

• Watts

• Amperes

In a 12V electrical circuit, what would be the effect on current if resistance is increased?

• Current would increase

• Current would decrease

• Current would remain the same

• Current would not flow at all

When checking the condition of road tyres, the minimum legal requirement permitted is?

• A minimum tread depth of 2mm in a continuous band around the centre three quarters of the tyre

• A minimum tread depth of 1.6mm in a continuous band around the centre three quarters of the tyre

• A minimum tread depth of 1.6mm in a continuous band around the tyre tread area

• A minimum tread depth of 2mm in a continuous band around the tyre tread area

When carrying out service maintenance activities the technician must complete the required documentation and include their signature and date completed. How important is the document?

• The service sheet is a documented record that is handed over to the customer and a copy is kept by the manufacturer for warranty records

• The service sheet is a guide for the technician only

• The service document cannot be used as evidence in a court of law

• The document is just a guide for the technician and a documented record is stored by the service department

A customer is wanting to lower the vehicle suspension with an aftermarket kit. Other than the fitment of the kit, what other systems will need to be adjusted to compensate for the changes?

• Vehicle geometry only

• Vehicle geometry and headlamp aim to be adjusted

• Headlamp aim only

• No other systems need adjusting

A repair on a customer's vehicle is held up because you are waiting for parts to be delivered. You should?

• Stop working on the vehicle and wait around for the parts to turn up

• Wait around until someone tells you what to do

• Immediately inform your supervisor/workshop controller of the situation

• Keep yourself busy by updating your social media posts

On reading a service label mounted on a battery casing it presents the letters CCA. What does this acronym represent?

• Controlled Cold Aptitude

• Controlled Cranking Amperage

• Cold Cranking Amperage

• Continuous Cranking Aptitude

On a tyres side wall, it reads 225/55 R18 97H. What is the 97H referencing?

• Tyre aspect ratio and wet tyre compound symbol

• Tyre load and speed rating

• Tyre aspect ratio and load rating

• Tyre speed rating and winter identification