TIPS AND MANUAL PROCEDURE TEXT

How to Install CD-ROM

1.Turn off your computer and unplug power cord from power outlet.

2.Carefully remove the computer cover.

3.Set the Master/Slave jumper on the rear panel of drive.

(To get best results, we strongly suggest that you connect your device to the Secondary IDE port as the MASTER device.)

4.Connect the IDE cable to the drive.

5.Connect the 4-pole power cable to the drive.

6.Connect the audio cable (if applicable).

7.Carefully slide the drive into the empty bay and mount it. Then replace the computer cover.

8.Plug your computer back to power outlet and then turn the power on.

What is the purpose of the text?

• To explain how to install CD-ROM

• To discuss the influence of CD-ROM on the computer work.

• To tell the readers how to connect computers using CD-ROM.

• To measure the effectiveness of computer working with CD-ROM installed.

How many ways do you get from the text?

• one way

• two ways

• three ways

• four ways

• five ways

How to Install CD-ROM

1.Turn off your computer and unplug power cord from power outlet.

2.Carefully remove the computer cover.

3.Set the Master/Slave jumper on the rear panel of drive.

(To get best results, we strongly suggest that you connect your device to the Secondary IDE port as the MASTER device.)

4.Connect the IDE cable to the drive.

5.Connect the 4-pole power cable to the drive.

6.Connect the audio cable (if applicable).

7.Carefully slide the drive into the empty bay and mount it. Then replace the computer cover.

8.Plug your computer back to power outlet and then turn the power on.

What should be done first before installing the CD-ROM?

• Remove the computer cover

• Turn off the computer and unplug the power cable

• Unplug all other devices first

• Turn the computer on before installing CD-ROM

 

1. Firstly, click on the forgotten account button on the right hand side of the login page.

2. Then search for your account on the “find account” page. Type either your username, email, or phone number in the box provided.

3. When you see your account, confirm it by clicking “this is my account”.

4. After that, reset your password. Don’t forget to indicate how you want to receive your code. If you choose email, you’ll get the code in your inbox.

5. When you get a notification in your email, click the link provided in your email to have the password reset.

The procedure text is mainly talking about…

• How to reset a Facebook account.

• How to create a Facebook account

• How to email a Facebook account.

• How to search for a Facebook account.

What kind of the text?

• poster

• banner

• tip

• manual

• procedure

What should you do after placing your clothes in a plastic bag?

• take it out from the freezer

• Place the bag in the freezer

• bring out from the freezer

• place the empty bag in the freezer

• place the bag in the refrigator

What do you prepare before using the printer?

• Printer

• Laptop/PC

• Printer and Cable

• All equipment above we need

• paper

The correct generic structure from manual and tips procedure text is...

• Tips - Manual -Tips

• Goal - Steps - Tips

• Goal - material-steps

• Steps - Goal - Manual

........ the blender by pressing the speed button, you can start from the medium speed.

The best instruction to fill the blank is ...

• End

• Start

• Pull

• Push

which is the correct imperative sentence...

• select the files

• selected the files

• selection the file

• selecting the file