Latian soal Day4

Which is the default port of MAC Winbox?

• UDP 8291

• TCP 8291

• UDP 8192

• UDP 20561

Answer explanation

Port yang digunakan MAC-WINBOX adalah UDP 20561

What is address-list used for?

• Erasing IP

• Groupping IP

• Groupping Interface

• Creating IP

Answer explanation

Address list digunakan untuk mengelompokkan IP address

Possible actions of ip firewall filter are?

• Bounce

• log

• accept

• tarp

• add to list

Answer explanation

Action yang bisa kita gunakan di firewall filter rules ada banyak, beberapa diantaranya adalah LOG & Accept

What is the correct action to be specified in the NAT rule to hide a private network when communicating to the outside world?

• Masquerade

• allow

• passthrough

• tarpit

Answer explanation

Kita memerlukan NAT Masquerade agar dapat terhubung ke internet

Destination NAT (chain dstnat, action dst-nat) can be used to

• Access local device from the internet

• Hide local network from internet

• Change source port

• Change destination port

Answer explanation

DstNAT / Port forwarding sering digunakan untuk mengakses device yang ada di local dari internet.

salah satu konfigurasi yang diperlukan adalah mengubah dst port.

Source NAT (chain srcnat, action redirect) allows u to make

• DNS Chace

• HTTP Proxy

• Forward DNS to another Device IP Address

• Enable local Service

Answer explanation

Action redirect, memungkinkan router untuk membelokkan traffic kembali kedalam router, sehingga dapat menciptakan HTTP PROXY dan juga DNS CHACE

During a scan, in order to see all the available wireless frequencies that are supported by the card, the following option must be selected in the wireless card's "Frequency Mode":

• Superchannel

• Regulatory domain

• Manual TXpower

• Super saiyan

Answer explanation

Superchannel digunakan untuk membuka semua Frequency channel yang dapat disupport oleh Wireless card mikrotik

Is it possible to limit how many clients are able to connect to an access point?

• Yes, but only with access list

• Yes, but only with with connect list

Answer explanation

Kita dapat memilah client yang boleh connect kedalam access point menggunakan ACCESS-LIST

How many clients are able to connected to AP Bridge?

• 28191

• 1

• 207

• 2007

Answer explanation

by default, AP BRIDGE dapat menampung sampai 2007 client

Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect?

• Default autenthicate

• Default forwarding

• Default ground

• Default devices

Answer explanation

untuk membatasi client yang dapat connect kedalam AP kita, selain menggunakan access list kita juga perlu untuk me-uncheck DEFAULT AUTHENTICATE