Hort 2 6.04 Review

What step in the procedure to clean leather should be done before rubbing leather with saddle soap?

• Apply mink oil

• Polish with paste wax

• Remove all dirt

• Sand with fine sandpaper

After removing saddle soapsuds with a damp cloth, what step in the procedure should be done?

• Brush off all dirt

• Give the leather time to dry

• Polish the leather with paste wax

• Sand the leather

What should Jason do last when doing routine maintenance on equipment?

• Change oil and filter

• Record maintenance in chart

• Refer to the owners manual

• Replace belts and chains

During a preoperational inspection, Kim checked the belts and chains for proper tension and found that they were slack. What should she do next?

• Adjust the belts and chains to specifications

• Clean the cooling fins as needed

• Fill the oil to the recommended level

• Replace the belts and chains with new ones

When doing routine maintenance on equipment, the first procedure that should be done is to:

• Adjust the belt and chain tension

• Change the oil and filter

• Look in the owner's manual

• Replace dull blades

When doing routine maintenance on equipment, Amanda sees in the maintenance records that the small engine has been used 25 hours since this maintenance has been done. What should she do next?

• Adjust belts and chains

• Record maintenance in chart

• Replace belts and chains

• Replace oil and filter

After Mark determines the potential hazard for a maintenance job, he should next:

• Clean the PPE

• Decide which PPE is needed

• Put on the PPE

• Wash his hands with soap and water

Molly used a blade balancer and found her sharpened blade was not balanced. What should she do next?

• lubricate with lightweight oil

• Paint with rust-resistant paint

• Remove more metal from high end

• Remove more metal from low end

Josh has applied a thin coat of wax onto a rake handle. What should he do next?

• Apply boiled linseed oil with a cloth

• Give the wax time to dry

• Polish the handle with a cloth, buffer, or polisher

• Remove the wax from the handle before it dries

Courtney has rubbed boiled linseed oil on a wood surface. What should she do next?

• Allow time for the oil to soak in

• Apply a thin coat of wax

• Paint the wood surface

• Wash off the excess oil with water