8. Which of the following is an example of discrete (digital) control?

B. Varying the brightness of a lamp

C. Varying the volume of a music system

o D. Controlling the speed of a fan

11.What does PLC stands for?

A. Programmable logic controller

D. Programmable limited control

12. Select the sequence of label from the below option.

B. 2.1.programming port 2.Input port 3.output port

A. 1.1.programming port 2.output port 3.Input port

A. 3. 1.output port. 2.programming port 3.Input port

13. What is the job of the CPU?

Store and run the PLC software program

Forms the interface between input field devices to the controller

Forms the interface between output field devices to the controller

14. Specify the inputs used in the wiring diagram of the PLC module given below

N.O. pushbutton 1, N.O pushbutton 2 & 3 wired ultrasonic sensor

N.O. pushbutton 1, N.O pushbutton 2

15. Specify the outputs used in the wiring diagram of the PLC module given below

N.O. pushbutton 1, N.O pushbutton 2 & 3 wired ultrasonic sensor

N.O. pushbutton 1, N.O pushbutton 2

32. How can you program LOGO!

Directly from the module keyboard;

From a computer equipped with LOGO! Soft Comfort;

installing a programmed memory module;

34. What does the LOGO! 24Ro

Module power supply =24V, output in the form of closing relay contacts, without keyboard and display;

=Module power supply =12V, output in the form of closing relay contacts, with keypad and display;

Module power supply =24V, with keypad and display;

Module power supply =12V, output in the form of closing relay contacts, without keyboard and display;

Power supply of the module =24V, output in the form of closing relay contacts.

35.What logic modules are included in the LOGO! family?

LOGO!Basic, LOGO!Pure, LOGO!Long, LOGO!Bus;

LOGO!Basic, LOGO!Pure, LOGO!Power, LOGO!Bus;

LOGO!Basic, LOGO!Pure, LOGO!Power, LOGO!Contact;

LOGO!Power, LOGO!Pure, , LOGO!Bus;

LOGO!Contact, LOGO!Pure, LOGO!Long, LOGO!Bus..

36. What does the DM marking mean?

Module for input-output of discrete signals;

37. What does the letter C mean in the markings of LOGO! modules?

Module with built-in real time clock;

Module equipped with built-in AS-i - interface;

Long version module (12 digital inputs/8 digital outputs);

Module with outputs in the form of normally open relay contacts;

38. What does the letter L mean in the markings of LOGO! modules?

Long version module (12 digital inputs/8 digital outputs);

Module equipped with built-in AS-i - interface;

Module with built-in real time clock;

Module with outputs in the form of normally open relay contacts;

39. How many digital inputs and digital outputs are there in LOGO!Basic?

8 digital inputs 4 digital outputs;

12 digital inputs 8 digital outputs;

4 digital inputs 6 digital outputs;

16 digital inputs 8 digital outputs;

8 digital inputs 12 digital outputs.

45.Which of the following features are typical for the further operation of the LOGO! in the event of a power failure (shutdown):

internal clock in LOGO! continue to work from backup power supply;

switching states and counter values are always stored in special functions;

the REM memory area is completely erased;

saving the current values of block variables in the RAM memory area;

46.What is meant by markers when programming a LOGO! in FBD language:

virtual outputs that have the same value at their output as at their input;

controller program execution status flags;

blocks that allow you to display various data on the display controllers;

there are no such program elements on FBD.

47. The LOGO! controller memory required for special functions is divided into 4 areas. What is stored in the PAR memory area:

used by the controller to implement time functions;

information about the progress of the program execution by the controller.

50.State the main advantages of the PLC polling system.

ease of implementation, ease of programming;

52. Scope of PC-based PLC:

A)With several inputs and outputs of the object, it is necessary to perform a large amount of calculations in a sufficiently small time interval;

b)Automation tools operate in an environment not too different from that of conventional PCs;

c)It is advisable to program the functions implemented by the controller not in one of the standard technological languages, but in an ordinary high-level language;

D)Powerful support for the operator's work implemented in conventional controllers (diagnostics, troubleshooting without stopping the controller, software modification during the operation of the automation system);

53. The main differences between a small-scale DCS and network controllers:

A)In a slightly larger variety of controller modifications;

b)In greater power of central processors;

c)In a more developed and flexible network structure;

D)In that they are designed to work in various environmental conditions;

56.The combination of all LOGO! modules into a single device is carried out through:

A)Introduction of a new module;

57. DM8 expansion modules can only be connected to modules with the same level:

A)Supply voltage and type of current;

b)Voltage and marking; c)resistance and current;

D)Power, body color and resistance;

58.Programming logic modules LOGO! Can be performed:

A)Directly from the keyboard of the LOGO! basic;

e)In the Pascal programming environment.

60.What does the SF library contain?

A)A set of special-purpose functions;

D)A set of functions containing the basic logical operations;

61.To avoid installation errors, all DM8 modules are equipped with:

c)Inputs and outputs of various colors;

Сфыв

Authored by Джамиль Уткельбаев

English

1st - 5th Grade

Used 3+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

126 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

1. What is the part of the PLC called where inputs and outputs are connected?

o A. Memory

o B. Input /output interface

C. Processor

o D. Power supply

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

2. Where does PLC stores its program?

A. Input device

B. Power supply

C. Programming device

D. Memory

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

3. Which of the following is a PLC input device?

o A. Fan

o B. Motor

o C. Sensor

o D. Light

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

4. Which of the following is NOT part of a basic PLC system?

o A. Relay box

o B. Power supply

o C. Memory

o D. CPU

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

5. Which of the following is an output device?

o A. Keypad

B. Distance sensor

o C. Sound sensor

o D. Motor

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

6. A PLC is a computer used for industrial automation.

o A. True

o B. False

o C. None of the above

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

7. Which of the following is the application of PLC?

o A. Wending machines

o B. Automatic door

o C. Cereal filling systems

o D. All of the above

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

122 questions

Future Tense Quiz

Quiz

•

5th Grade

127 questions

quá mệt 2

Quiz

•

5th Grade

123 questions

SMS 4 [Review Theme 1] ANIMALS

Quiz

•

1st - 5th Grade

126 questions

G3 TEST END TERM 2

Quiz

•

3rd Grade

130 questions

E.11.U7.FURTHER.EDUCATION

Quiz

•

1st Grade

125 questions

BOOK 1

Quiz

•

1st - 5th Grade

125 questions

Module 7 Year 4 SKTS

Quiz

•

1st - 5th Grade

124 questions

RCV tổng hợp số 2

Quiz

•

5th Grade - University

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

54 questions

Analyzing Line Graphs & Tables

Quiz

•

4th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

Discover more resources for English

20 questions

Main Idea and Details

Quiz

•

5th Grade

14 questions

Nonfiction Text Structures

Quiz

•

4th Grade

10 questions

Context Clues

Quiz

•

3rd Grade

12 questions

Figurative Language Review

Interactive video

•

5th Grade

20 questions

Prefix and Suffix Review

Quiz

•

3rd - 5th Grade

20 questions

Character perspective, theme, summarize, author's purpose

Quiz

•

5th Grade

20 questions

Shifts in Verb Tenses

Quiz

•

5th Grade

20 questions

Figurative Language

Quiz

•

5th Grade

Сфыв

1. What is the part of the PLC called where inputs and outputs are connected?

2. Where does PLC stores its program?

3. Which of the following is a PLC input device?

4. Which of the following is NOT part of a basic PLC system?

5. Which of the following is an output device?

6. A PLC is a computer used for industrial automation.

7. Which of the following is the application of PLC?

8. Which of the following is an example of discrete (digital) control?

9. What are solenoids, lamps, and motors connected to?

10. Gear Box is used to decrease the speed and increase the torque.

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for English