MOD 11

What is the maximum aggregate data capacity (throughput) of the PTP-700?

• Up to 200 Mbps

• Up to 450 Mbps

• Up to 600 Mbps

• Up to 800 Mbps

What does IP Link Optimization provide in the point-to-point (PTP) topology?

• Increased network security

• The maximum possible link capacity

• Reduced latency

• Improved signal strength

The channel bandwidth options in the point-to-point (PTP) topology are: 5,​ (a)   ,15,​ (b)   ,​ (c)   ,​ (d)   ,45 MHZ.

• 10
• 20
• 30
• 40
• 25
• 35
• 8

What function does the Main Power Supply Unit (PSU) Ethernet Port provide?

• Ethernet traffic detection

• Power regulation

• Data transmission

• Network monitoring

To minimize the latency and jitter for high-priority Ethernet traffic, the PTP 700 __ Ethernet frames before transmission over the wireless link.

• Duplicates

• Encrypts

• Fragments

• Compresses

1. What is the output power, per channel, of the Cluster Management Module (CMM5) and Sync Injector power supply unit (PSU)?

• A single voltage output

• A constant frequency output

• one pulse-per-second (1PPS)

• An alternating current output

What are the two maximum drop cable lengths for the AC+DC Enhanced Power Injector 56V Power Supply Unit (PSU)?

• 50m(165ft)/ 100m(330ft

• 150m(495ft)/

  200m(660ft)

• 100m (330ft)/ 300m(990ft)

• 200m(660ft)/
  300m(990ft)

What is not a main requirements when determining the Outdoor Unit (ODU) and external antenna location?

• The equipment is high enough to achieve the best radio path.

• People can be kept a safe distance away from the equipment when it is radiating.

• he equipment is lower than the top of the supporting structure (tower, mast or building) or its

  lightning air terminal.

• The equipment is in a location with good signal strength.

• If the ODU is connectorized, select a mounting position that gives it maximum protection from

  the elements, but still allows easy access for connecting and weatherproofing the cables.

If the ambient temperature never exceeds 40 degrees Celsius, what is the touch temperature limit of the Outdoor Unit (ODU)?

• 70 degrees C

• 50 degrees F

• 60 degrees C

• 70 degrees F

1. The requirements that have to be met when considering where to mount/install the Power Supply Unit (PSU) are:

2. • The voltage and polarity must be correct and must be applied to the correct PSU terminals.

3. • ​ (a)  

4. • ​ (b)  

5. • The power source cannot provide more than the Energy Hazard Limit as defined by 

6. IEC/EN/UL60950-1, Clause 2.5, Limited Power (The Energy Hazard Limit is 240VA).

• The power source must be rated as Safety Extra Low
• The power source must be rated to supply at least
• Area must be free and clear of all distractions
• Cable is blue