Advanced Woods Safety Test

On a table saw, never cut _____________ stock.

• Square
• Rectangular
• Cylindrical
• Triangular

Table Saw: All adjustments should be made before the saw is turned ______________.

• on
• off
• around
• backwards

Table Saw: The guard and fence or miter guage ____________ while the machine is in operation.

• should be used
• can be removed
• are not needed

Table Saw: The saw blade should rise ____________ above the stock.

• as high as possible
• no more than 1/4"
• no more than 1/2"
• no more than 1"

Table Saw: Use a push stick when ripping wood less than ____________.

• 4" wide
• 12" wide
• 1" wide
• the fence height

Table Saw: Stand to ___________ side of the blade when cutting on a table saw to avoid kickback.

• the left
• the right
• one
• the back

Table Saw: The material edge that is held against the fence or miter gauge while making a cut should be _____________.

• straight (jointed)
• curved
• painted
• rounded over

Table Saw: When clearing scrap from the table saw, you should _____________.

• use a scrap piece of wood
• ask another student for help
• wait until the saw stops
• move it with compressed air.

Table Saw: A helper, should not ______________ stock that is passing through the saw.

• pull
• help guide
• watch
• hold

Table Saw: Any operation that requires a special setup must be approved by the instructor ______________ use.

• after
• before
• part way through
• during