Roofing Basics 2 of 3

What is the purpose of the starter shingle?

• To secure the bottom edge of the shingles

• To keep water away from the roof deck

• Both A and B

• None of the above

How much should the starter shingle overhang into the gutter?

• Maximum of 1 inch

• Minimum of a quarter inch

• About three quarters of an inch

• It doesn't need to overhang

Why is it important to cut the bubbles in the ice shield?

• To prevent water from seeping under the shingles

• To improve the adhesion of the ice shield

• To make the roof look more aesthetically pleasing

• It is not necessary to cut the bubbles

What is the recommended length of the starter shingle?

• Same length as the shingle

• Shorter than the shingle

• Longer than the shingle

• It doesn't matter

Why is it important to stagger the starter shingles?

• To create a more secure bond between the shingles

• To prevent water from seeping through the seams

• To improve the overall appearance of the roof

• Staggering is not necessary for starter shingles

What is the purpose of snapping lines on the roof?

• To ensure the roof is straight

• To create guidelines for laying the shingles

• To prevent mistakes and maintain alignment

• All of the above

What is the reveal measurement for most shingles?

• 5 and 5 eighths

• 13 and a quarter

• Both A and B

• None of the above

How often should you snap lines on the roof?

• Every row

• Every other row

• Every fifth row

• It is not necessary to snap lines

What is the purpose of the chalk lines?

• To guide the placement of the shingles

• To ensure the shingles are aligned

• To prevent mistakes and maintain straightness

• All of the above

How should the shingles be nailed near the drip edge?

• Nail as close as possible to prevent lifting

• Nail at the bottom of the shingle

• Nail through the little lip on the drip edge

• Nailing near the drip edge is not necessary