BP 344

What is the maximum allowable slope for PWD ramps, according to BP 344?

• 10%

• 12%

• 1:10

• 1:12

For ramps using the maximum allowable slope, a landing must be provided after every 6.00 meters of horizontal travel distance. What is the minimum length of this landing?

• 1.00m

• 1.20m

• 1.50m

• 2.00m

What is the minimum width required for a dropped curb leading to a 1.20m-wide crossing?

• 0.90m

• 1.00m

• 1.20m

• 1.50m

What is the minimum dimension of the required turnabout space for walkways and what should be the maximum distance between two turnabout spaces?

• Minimum dimension of 1.20m, maximum distance of 15.00m

• Minimum dimension of 1.50m, maximum distance of 12.00m

• Minimum dimension of 1.20m, maximum distance of 12.00m

• Minimum dimension of 1.50m, maximum distance of 15.00m

Handrails are required for ramps, stairs, and dropped curbs at crossings. These handrails should be installed at what height/s?

• 700mm and 900mm

• 800mm and 900mm

• 900mm and 1000m

• 900mm only

What is the minimum width of an accessible parking slot?

• 2.15m

• 2.50m

• 2.70m

• 3.70m

What is required to be provided at the bottom and the top of a ramp?

• A turnabout space with a minimum dimension of 1.50m

• A vestibule with a level space at least 1.50m wide and 2.00m deep

• A curb with a minimum height of 100mm

• A level area not less than 1.80m in length

What are the minimum dimensions of a toilet stall for PWDs?

• 1.50m x 1.50m

• 1.50m x 1.80m

• 1.70m x 1.80m

• 1.80m x 2.00m

What are the minimum dimensions required for elevators?

• Hoistway inside dimensions of 1.10m x 1.40m

• Car inside dimensions of 1.10 x 1.40m

• Hoistway inside dimensions of 1.10 x 1.70

• Car inside dimensions of 1.10 x 1.70

What is the maximum travel distance allowed for accessible elevators?

• 10.00m from entrance

• 15.00m from entrance

• 20.00m from entrance

• 30.00m from entrance