Xcode VR drive train

What is the purpose of the 'drive forward for___' command?

• To change the camera angle

• To stop the robot from driving

• To make the robot move forward for a specific distance

• To turn the robot to the right

Why did the robot not move when the 'drive forward' command was used alone?

• The command was not written correctly

• The command did not specify a distance or time

• The robot was not turned on

• The simulator was not working properly

How far did the robot move when the 'drive forward' command was used for 200 millimeters?

• Halfway through the square

• It did not move at all

• To the other side of the board

• Perpendicular to its original direction

What is the purpose of the 'turn right' command?

• To rotate the robot 90 degrees to the right

• To stop the robot from driving

• To make the robot move forward for a specific distance

• To turn the robot to the left

How far did the robot move when the 'drive forward' command was used for 500 millimeters?

• It did not move at all

• Perpendicular to its original direction

• To the other side of the board

• Halfway through the square

What is the purpose of the 'stop driving' command?

• To turn the robot to the right

• To change the camera angle

• To stop the robot from driving

• To make the robot move forward for a specific distance

How can you delete a command block in Xcode VR?

• By double-clicking on it

• By right-clicking on it and selecting delete

• By clicking on it and pressing the Delete key

• By dragging it back to the library of functions

What is the purpose of the 'turn left _____' command?

• To make the robot move forward for a specific distance

• To turn the robot to the right

• To rotate the robot a specific degree to the left

• To stop the robot from driving

How far did the robot move when the 'drive forward' command was used for 1600 millimeters?

• Halfway through the square

• To the other side of the board

• Perpendicular to its original direction

• It did not move at all

What is the purpose of the 'set drive velocity' command?

• To make the robot move faster or slower

• To change the camera angle

• To rotate the robot 90 degrees to the right

• To stop the robot from driving