Airspace part 2

According to 14 CFR Part 107, the remote pilot in command (PIC) of a small unmanned aircraft planning to operate within Class D airspace

• Must only operate within the outer ring of the airspace

• Must use a visual observer

• Is required to receive ATC authorization

Class C airspace generally extends from the surface to 4,000 ft above the airport elevation, charted in MSL, in the center ring. Although the configuration of each Class C area is individually tailored, what is typically the floor of Class C airspace in its outer ring?

• 4,000 ft MSL

• 1,200 ft MSL

• 1,200 ft above the airport elevation

(Refer to Figure 20, Area 1.) The Fentress NALF Airport (NFE) is in what type of airspace?

• Class E.

• Class C.

• Class G.

(Refer to figure 22, area 4.) The floor of the controlled airspace overlying the Coeur D'Alene Airport is

• 700 ft MSL

• At the surface

• 700 ft AGL

(Refer to FAA-CT-8080-2H, Figure 23, area 3.) What is the floor of the Savannah Class C airspace at the shelf area (outer circle)?

• 1,300 feet AGL.

• 1,300 feet MSL.

• 1,700 feet MSL.

(Refer to Figure 25, Area 4.) The floor of Class B airspace overlying Hicks Airport (T67) north-northwest of Fort Worth Meacham Field is

• at the surface

• 3,200 feet MSL

• 4,000 feet MSL

(Refer to Figure 26, Area 5.) The airspace overlying and within 5 miles of Barnes County Airport is:

• Class D airspace from the surface to the floor of the overlying Class E airspace.

• Class E airspace from the surface to 1,200 feet MSL.

• Class G airspace from the surface up to but not including 700 feet AGL.

(Refer to FAA-CT-8080-2H, Figure 78. Near the center of the figure.) What class of airspace is associated with the extensions to the SIOUX GATEWAY/COL DAY (SUX) Airport class D airspace?

• Class B airspace

• Class C airspace

• Class E airspace