What is one of the benefits of a freehand sketch mentioned in the learning material?

Quickly illustrates information

How does freehand sketching improve communication according to the text?

By improving communication between technical and non-technical people

By using detailed technical terms

Are scale and ruler always necessary when creating a freehand sketch?

No, but ratio and proportion of different parts of an object are considered

Yes, but only for technical sketches

No, they are never used in sketches

What does orthographic projection describe in engineering drawing?

The projection of a 3D object onto a single drawing surface

The method of shading and texturing a drawing

The process of creating a 3D model from a 2D drawing

The technique for drawing circuit diagrams

How many views of an engineering component are typically shown to detail every important feature?

At least two, three or more views

What is the purpose of having multiple individual drawings on the same sheet in a complete drawing?

To show the same component from different angles

To provide a variety of designs for the same component

To compare the component with other components

To show the assembly process of the component

What do the individual drawings in a complete engineering drawing provide to the craftsperson?

Enough information to repair, install, or create the item

A guide for marketing the product

The history of the component's design

Instructions for the machine operator

What does the 'P' label represent in the pictorial view of the orthographic projection diagram?

The plane representing the left side view

The plane representing the back view

The plane representing the front view

The plane representing the bottom view

When creating an orthographic projection, what is important to remember about the layout on the page?

It should be balanced and neat, with room for dimensions.

It should be cluttered to fit as much information as possible.

It should focus on artistic expression rather than accuracy.

It should only show the most complex view of the object.

What do the first and third angle symbols represent in orthographic projection?

Different schemes to show orthographic projection

Different types of isometric projection

Symbols for different welding techniques

Different methods of dimensioning

What is the projection symbol for first angle projection?

A circle with a diagonal line through it

A circle with a horizontal line through it

Which view is labeled as 'Front view A' in the first angle projection diagram?

The view from the front of the car

The view from the top of the car

The view from the right side of the car (back of car)

The view from the left side of the car (front of car)

Which symbol is used to represent the third angle projection in the image?

A circle with a horizontal line and a short line perpendicular to it on the right side

A circle divided by a horizontal line

A square divided by a vertical line

A triangle divided by a diagonal line

What view does the label 'Top view A (top of car)' refer to in the image?

The view from the front of the car

The view from the right side of the car

The view from the left side of the car

Which view is labeled as 'Front view A (side of car)' in the image?

The view from the front of the car

The view from the right side of the car

The view from the left side of the car

What does the label 'Bottom view E (underneath of car)' indicate in the image?

The view from underneath the car

The view from the front of the car

The view from the right side of the car

In first angle orthographic projection, how is the model view drawn in relation to the face being viewed?

Directly on the face being viewed

Perpendicular to the face being viewed

What is the symbol for BS 8888 first angle projection?

Two perpendicular lines with one line bisecting the other

A circle divided into four quadrants

A triangle with a horizontal line through it

In orthographic projection, what does the third angle projection method imply about the model views?

The model view is drawn adjacent to the face being viewed.

The model view is drawn opposite to the face being viewed.

The model view is drawn in a random order next to the face being viewed.

The model view is drawn on the same plane as the face being viewed.

What is the symbol for BS8888 third angle projection?

A circle with a horizontal line through it.

A square with a diagonal line through it.

A triangle with a vertical line through it.

An arrow with two lines intersecting it.

What is one way to visualise orthographic projection according to the glass box approach?

By imagining a glass box around an object and tracing the object's outlines

By drawing the object's outlines on a single plane

By using a computer software to generate the object's views

By sketching the object from different angles on paper

What is an isometric drawing or projection used for in design?

To draw an object in three dimensions

To draw an object in two dimensions

To provide a detailed manufacturing guide

To create a one-dimensional sketch

How are isometric drawings perceived in terms of width and depth?

They are angled back at 30 degrees

They are angled forward at 45 degrees

They are angled back at 45 degrees

They are not angled and show true dimensions

For whom are isometric drawings of little use as compared to their value as a visual aid?

The craftsperson who has to produce the item

For what purpose can isometric projections be used?

In assembly, exploded, and installation diagrams

What is the purpose of creating a sectional or section view in engineering drawings?

To show the internal features of an object

To show the external features of an object

To replace orthographic projections

To display the object in a three-dimensional perspective

Engineering Drawing Quiz

Authored by Cendan Cevizli

Science

12th Grade

NGSS covered

Used 2+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

53 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

By the end of the session, learners should be able to describe which type of engineering drawing that involves creating a drawing at different angles to represent three dimensions?

Freehand sketch

Orthographic and isometric

Section and cross-sectional

Detail

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What type of engineering drawings should learners be able to describe that show an object's internal features without the external view?

Assembly

Detail

Section and cross-sectional

First (1st) and third (3rd) angle

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which type of engineering drawing is used to show the individual components before they are assembled?

Freehand sketch

Detail

Section and cross-sectional

Assembly

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What is a freehand sketch typically drawn with?

A computer and a mouse

Measuring instruments and a marker

A pencil and eraser only

Watercolors and a paintbrush

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What is the primary purpose of freehand sketches in engineering?

To create detailed and precise engineering drawings

To present an idea quickly

To replace computer-aided design (CAD) software

To serve as legal documents

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What is the next step after a freehand sketch concept is accepted in engineering?

The concept is discarded

An engineering drawing is prepared

The sketch is framed and displayed

The idea is patented

Where can a freehand sketch be produced according to the learning material?

Only in a professional studio

In a specific technical environment

Anywhere

Only in an educational setting

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

51 questions

NCFE Review #2 Lithosphere Part I: Rocks, Soil, Weathering/Eros

Quiz

•

9th - 12th Grade

55 questions

Module 2: Atoms and Elements - Review

Quiz

•

9th - 12th Grade

51 questions

Chapter 19 Review

Quiz

•

9th Grade - University

54 questions

HS-ESS2-6 Carbon Cycle

Quiz

•

10th - 12th Grade

54 questions

Unit 4 AP Psychology

Quiz

•

12th Grade

56 questions

conservation biology and evolution review

Quiz

•

9th - 12th Grade

48 questions

PLTW Principles of Biomedical Science - Midterm Review

Quiz

•

9th - 12th Grade

53 questions

Unit 3 Exam Practice

Quiz

•

10th - 12th Grade

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

20 questions

Figurative Language Review

Quiz

•

6th Grade

Discover more resources for Science

14 questions

Natural Selection and Adaptation

Lesson

•

9th - 12th Grade

38 questions

Water Cycle and Groundwater

Quiz

•

9th - 12th Grade

12 questions

Cell Organelles and Their Functions

Lesson

•

9th - 12th Grade

13 questions

Amoeba Sisters: Biomolecules

Interactive video

•

9th - 12th Grade

25 questions

APES Unit 6 Review

Quiz

•

12th Grade

60 questions

2025 Genetics Test Study Guide

Quiz

•

9th - 12th Grade

10 questions

Understand Cell Functions and Organelles

Quiz

•

9th - 12th Grade

16 questions

Explore Cell Cycle Stages and Mitosis

Quiz

•

9th - 12th Grade