What is the first step in cleaning a Bernina sewing machine?

• Remove the bobbin case

• Unplug the foot control

• Remove the thread from the machine

• Take off the presser foot

What should you do after removing the thread to avoid dragging lint?

• Use a lint roller on the machine

• Blow on the needle to remove lint

• Clip the thread from the top and remove it in the direction it works

• Pull the thread from the spool right out

What is the next step after opening up the sewing machine?

• Oil the machine immediately

• Remove the bobbin case

• Replace the needle

• Turn off the machine

According to the manual, what should you do before cleaning the machine?

• Read the warranty

• Sew a test fabric

• Turn off the machine

• Consult a professional

What allows you to see what you are doing while ensuring safety?

• Wearing safety goggles

• Turning on additional lights

• Unplugging the foot control

• Keeping the foot control plugged in

How do you remove the presser foot?

• Unscrewing it from the bottom

• Lifting up the lever in the back and pulling the unit down

• By pushing a button on the side

• Pulling it straight up

What types of fabric are mentioned as being particularly linty?

• Silk and satin

• Denim and twill

• Cotton and polyester

• Flannel and fleeces

What is the recommended direction for removing the thread?

• In a circular motion around the spool

• Any direction as long as it is fast

• In the opposite direction it was threaded

• In the same direction it always works