Pi Scania juni 2024

How many methods are provided by Scania according to Multi regarding "treatment" units that will not be used for a long time?

• ~2 method
• ~No Method
• ~4 method
• =1 method

Changing the oil on the unit after the unit has not been used for a long time is one of the methods on?

• ~Repeat every three weeks
• ~Storage for up to six months
• ~Repeat every Seven months
• =Storage for up to three months

When the unit is stored for a period of up to 6 months, one of the activities carried out is?

• ~Lubricate the chassis and check the lubri_x0002_cating oil and grease level
• ~Supplement the cab corrosion protection
• ~Drain the pressure tanks and renew the fuel filter
• =Wash the vehicle very carefully

If the vehicle is to be stored for more than six months, pure high quality diesel must be used. This statement is a treatment that we must do when the unit is stored?

• ~Storage for up to six months
• ~Storage for up to three months
• ~Answers a and c are correct
• =Storage for more than six months

One method that we must do once every 3 weeks is ?

• ~Drain oil Engine
• ~Charge both batteries if the voltage in either of them is below 12.6 V
• ~Answers a and c are correct
• =Charge both batteries if the voltage in either of them is below 12.6 V

How many methods are provided by Scania based on multi for component storage such as the example of a diesel engine?

• ~Differential
• ~Hoist System
• ~Steering System
• =Transmission

Diesel engine with complete fuel and cooling system. This storage can also be carried out according to the procedure in Multi. Is the above statement true or false?

• ~FALSE
• =TRUE

Normally, an engine can be stored for up to six months indoors and three months outdoors without any special actions. Is the above statement true or false?

• ~FALSE
• =TRUE

one of the methods used at the time of Taking the engine back into service after long term storage is

• ~Pack the engine in a sealed plastic bag to reduce the impact of external factors such as atmospheric humidity, etc
• ~Remove the seals on air intakes and exhaust pipes
• ~Answers a and c are correct
• =Bleed the fuel system

Where can we find the procedure for how to handle the storage of our Scania units or components?

• ~Multi > Maintenance > general
• ~Multi > TI > general
• ~Multi > Workshop Manual > general
• =Multi > spare parts > general