3 SAFETY TEST: Circular Saw

It is important to make sure that all stock (is / is not) supported and securely clamped down.

• Is

• Is not

Adjust the depth of cut to the thickness of the stock (material) plus ______

• 1/4 inch

• 1/2 inch

• 3/4 inch

The power cord (should / should not) be clear of the blade.

• Should

• Should not

Your work area should be ______ before you start cutting.

• Clean

• Dirty

Check the base and angle adjustments to be sure they are ________

• Loose

• Tight

Always place the base of the saw on the stock you will be cutting. Make sure that the blade (is / is not) actually touching the stock before you turn it on!

• Is

• Is not

Advance the saw blade through the work _______

• Slowly

• Quickly

Make sure the blade cuts into the work _______

• Angled

• Straight

You should set the saw down after the blade has come to a _____ stop!

• Half

• Full

You should _____ the machine to change the blades or to make any adjustments.

• Unplug

• Turn On