Switching and Routing Quiz 2

What does SVI stand for?

• Switch Virtual Interface

• Switch Vital Interface

• Stitch Virtual Interface

• Switch Vlan Inter-Routing

DHCP stands for:

• Dead Host Configuration Protocol

• Dynamic Home Configuration Protocol

• Dynamic Host Configuration Protocol

• Dynamic Host Central Protocol

In order to manage a switch from a remote network it must have a ______ configured.

• default gateway

• default pathway

• path forward

• open door

Command to save the running config to the startup config:

• copy running-config startup-config

• write

• wr

• All are correct

What is the function of STP in a scalable network?

• It decreases the size of the failure domain to contain the impact of failures.

• It protects the edge of the enterprise network from malicious activity.

• It disables redundant paths to eliminate Layer 2 loops.

• It combines multiple switch trunk links to act as one logical link for increased bandwidth.

What are two requirements to be able to configure an EtherChannel between two switches? (Choose two.)

• All the interfaces need to work at the same speed.

• All interfaces need to be assigned to different VLANs.

• Different allowed ranges of VLANs must exist on each end.

• All the interfaces need to be working in the same duplex mode.

• The interfaces that are involved need to be contiguous on the switch.

When EtherChannel is implemented, multiple physical interfaces are bundled into which type of logical connection?

• interface range

• loopback

• VLAN interface

• port channel

When EtherChannel is configured, which mode will force an interface into a port channel without exchanging aggregation protocol packets?

• active

• auto

• on

• desirable

What kind of Etherchannel autonegotiation is done if the two modes on either side are on and on?

• None

• LACP

• PAgP

What is an accurate description of redundancy?

• designing a network to use multiple virtual devices to ensure that all traffic uses the best path through the internetwork

• configuring a router with a complete MAC address database to ensure that all frames can be forwarded to the correct destination

• configuring a switch with proper security to ensure that all traffic forwarded through an interface is filtered

• designing a network to use multiple paths between switches to ensure there is no single point of failure