RouterOS Quiz

What can you do with Netinstall?

• Reset password in RouterOS

• Install Linux

• Add configuration to RouterOS

• Reinstall RouterOS

Consider the attached diagram: In order for Router 1 to see all of the networks the following commands could be used (choose all answers that could work)

• /routing add dst-address=0.0.0.0/0 gateway=10.10.0.2

• /ip route add dst-address=0.0.0.0/0 gateway=10.10.0.2

• /ip route add dst-address=172.16.0.0/24 gateway=10.10.0.2, /ip route add dst-address=172.32.0.0/24 gateway=10.10.0.2

• /ip route add dst-address=172.16.0.0/24 gateway=10.10.0.2, /ip route add dst-address=172.32.0.0/24 gateway=10.50.0.2

Configuring HotSpot is possible on MikroTikRouterOS only with a wireless interface.

• Yes

• No

What menus should be used to allow certain websites to be accessed from behind a hotspot interface, without client authentication

• ip hotspot ip-binding

• ip hotspot profile

• ip hotspot walled-garden ip

• ip hotspot walled-garden

For static routing functionality, additionally to the RouterOS system package, you will also need the following software package:

• none

• routing

• advanced-tools

• dhcp

Netinstall can be used to

• Install different software version (upgrade or downgrade)

• Keep configuration, but reset a lost admin password

• Reinstall software without losing licence

• Install package for different hardware architecture

In which order are the entries in Access List and Connect List processed?

• By interface name

• In sequence order

• By Signal Strength Range

• In a random order

In Winbox, Hide Passwords unchecked shows passwords for the following

• RouterOS user

• Hotspot User

• RADIUS shared secret

• PPP secrets

Which options should be used when you want to prevent access from one specific address to your router web interface?

• Firewall Filter Chain Forward

• Firewall Filter Chain Input

• Group settings for System users

• WWW service from IP Services

Which of the following would prevent unknown clients from connecting to your AP? Choose the BEST answer.

• Check the "Do not permit unknown client" box in the wireless configuration

• Uncheck "Default Authenticate" in the wireless card configuration, and add each known client's MAC address to your access-list configuration ensuring that you enable "authenticate" in the entry

• Add each known client's MAC address to your access-list configuration is the only step needed

• Uncheck "Default Authenticate" in the wireless card configuration, and add each known client's MAC address to your connect-list configuration

• Configure the radius server under "/radius"