Which statement describes evaporation?

The change of state of a substance.

The transfer of heat from one object to another.

The circulation of air currents.

What best describes the force that keeps the water flowing when siphonic action takes place?

Force applied to the mechanism.

Which statement best describes the term Mechanical Advantage?

The use of less effort to lift or move an object.

The speed in which an object can be moved.

People performing manual tasks without the use of equipment.

During a development, as the work progresses, what information would the client regularly expect to receive?

Any delays to agreed time completion dates.

Updated costings of materials from the merchants.

Changes to the works profit margins.

When producing a sequence of works and timeline for work you are to undertake on a large development, what would you need to consider in addition to your own needs?

The schedule other trades on the job are working to.

The schedule of break times across the site.

The timeline of delivery of materials for other trades.

The availability of food and drink on and off site.

When completing a risk assessment for a task to be undertaken, what factors would you consider?

Hazards and who might be at harm.

Efficiencies and ways for the task to be completed quickly.

Payment schedules and the impact on staff morale.

Previous accidents that staff have been involved in on other tasks.

What advantage would a mains fed direct hot and cold water system have over an indirect system?

Equal high pressure at all outlets.

Quieter pipes when the water is running.

Hot water at a higher temperature.

Water flow at a lower velocity rate.

In what situation would trace heating be installed to pipework?

Where pipework could be exposed to cold that could lead to pipework freezing

To prevent having to insulate the pipework

To prevent dead legs in a system

To heat the surrounding space of the area in which the pipework is located

When filling a newly installed cold water system for the first time what class of water must be used?

Class 1 directly from the main supply.

Class 2 directly from the main supply.

Class 3 directly from the main supply.

Class 4 directly from the main supply.

What routine procedure would be undertaken during the periodic inspection of a cold water system on a planned maintenance programme?

Remove and clean the line strainer to the inline filter.

Check drainage chambers for blockages.

Check waste traps for blockages.

What advantage does a combination boiler hot water system have over a traditional open vented system?

Less wastage due to water being only heated when needed.

Access to stored hot water in a power failure.

A secondary heat source should the hot water system fail.

When filling a newly installed system, what checks would you undertake before filling with water?

Undertake a visual inspection of all pipework and check all joints are tight.

Turn the water on and then look for leaks.

Ensure the expansion vessel is charged to the correct pressure.

Test the system with all taps in the open position.

What purpose does the open vent on the primary circuit of a heating system serve?

Relieves excess pressure in the system if it overheats.

Keeps the water in the expansion tank warm.

Provides a filling point for the system.

Decreases the flow rate of water in the system.

When filling and releasing air from a central heating system, where would you start to remove air?

At the lowest available bleed point.

At the highest point in the system.

By opening all taps on the hot water system.

When undertaking routine maintenance checks on a central heating system, why is it important to check all radiators are getting hot on the system?

To check for cold spots identifying sludge problems.

To check that the system has water in it.

To check whether there is inhibitor in the system.

What advantage does a separate rainwater system have over a combined rainwater system?

It diverts rainwater to a soakaway, minimising waste to treatment plants.

It drains away the water quicker.

It is less likely to become blocked by leaves.

It has less pipework to be installed.

What is the correct method for performance testing a newly installed gutter system?

Pour water over the roof area evenly.

Pour a bucket of water into the gutter.

Lay a hose pipe in the gutter and turn on.

Place a ball in the gutter to see if the fall is correct.

How would a leak on a gutter joint be repaired whilst still allowing the thermal movement of the joint?

Replacing the entire length of gutter.

What is one advantage of a ventilated branch discharge system over a primary ventilated stack system?

The risk of trap seal loss is eliminated.

Traps are not needed at every appliance.

The system is less likely to suffer from blockages.

The appliances need to be closer to the discharge stack.

Why is the maximum air test pressure for a soundness test on a sanitation discharge system 38 mm at the manometer?

To prevent the WC trap seal being lost during testing

To prevent the pipe work being under undue stress

To prevent the water seal being lost at the kitchen sink during testing

What forms part of the routine checks on a sanitary system during a maintenance schedule?

Removing and cleaning of water traps.

Re-washering float operated valves.

Adjusting the water pressure at the water meter.

Checking the operation of all taps and valves.

When advising a client on the choice of fuel for a system installation, what would be the key deciding factor?

The efficiency and availability of fuel to the location.

How many people live in the house.

What consideration has to be made before installing a biomass boiler?

There is enough dry internal space for the fuel to be stored.

How many occupants the dwelling has.

There is access to plenty of coal.

The dwelling must have a high water pressure supply.

Identify the three constituents that are required for complete combustion to take place within an appliance.

Fuel, carbon dioxide, ignition source.

Carbon monoxide, heat, ignition source.

When servicing a gas appliance there are dark soot marks evident. What would this tell you about the operation of the appliance?

That incomplete combustion is taking place.

That the appliance is getting too hot.

That the appliance is not getting hot enough.

There is a leak on the gas supply.

Identify the flue system in the image.

Room-sealed vertical flue system.

Natural draught room-sealed flue system.

From where would a room-sealed balanced flue appliance take its air to operate safely?

From the emissions of the burner.

From inside the room via the appliance casing.

From the emissions of the boiler.

What advantage does alternating current have over direct current in electrical installations?

AC current can be transmitted over long distances without voltage drop.

AC current is less likely to cause a serious shock.

AC current uses fewer cables in a property.

AC current is portable in batteries.

Why is it essential that a lock is used to isolate a mains switch when working on an appliance with an electrical supply?

To prevent anyone turning the supply back on accidentally.

To ensure earth continuity is maintained.

To make sure the power stays on.

To ensure the fuse does not trip.

Where would information be found about the safe process of changing components on a faulty gas appliance?

Manufacturer's technical specification.

Manufacturer user instructions.

EPA Sample Quiz 2

Authored by Darren Harvey

Construction

3rd Grade

Used 4+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

50 questions

Show all answers

MULTIPLE CHOICE QUESTION

1 min • 1 pt

At what point would an employer be required to produce a written Health and Safety policy to be compliant with the Health and Safety at Work Act?

When trading as a sole trader.

When an accident has occurred on site.

When employing five or more people.

When becoming a Limited Company.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

How would you minimise the likelihood of an accident occurring during a construction project?

Read the job specification provided before starting the works.

Refer to the risk assessment before starting the works.

Ask a colleague for advice on how to undertake the work safely.

Refer to the Health and Safety at Work Act before starting the works.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

What actions should you take if you discover a fire on a building site?

Lock all emergency doors and secure the building.

Raise the alarm and vacate to the designated muster point.

Tackle the fire yourself.

Collect all your belongings and leave the building.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

For what reason must LPG Cylinders be stored in a cage, open to the outside air?

To keep them cold.

To enable any escaping gas to disperse into the air.

To enable easy access for anyone to change the bottles.

To allow the bottles to naturally weather.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

What access equipment would you select to repair a leaking gutter joint on a house?

Tall step ladder.

Extension ladder.

Mobile tower scaffold.

Trestles and planks.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

The proprietary support system would enable a worker to operate safely when working where?

In a loft space.

Under a wooden floor.

In an excavation.

On a floor.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

What check would you undertake on a 110-volt power tool before commencing work with it?

It carries a current PAT test sticker that is within date.

It is yellow in colour.

It is made from conductive materials.

It has a fully charged battery.

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

47 questions

Appraisal7 Contracts Quiz

Quiz

•

University

49 questions

Plumbing Processes PPT 1 - Hand Tools

Quiz

•

12th Grade - University

47 questions

Quiz Pengadaan Barang/Jasa Pemerintah

Quiz

•

University

50 questions

Intro to Construction Documents

Quiz

•

6th - 8th Grade

47 questions

Woodfab Technical Knowledge Quiz

Quiz

•

University

47 questions

312 - Electrical supplies to the property

Quiz

•

12th Grade

46 questions

Unit 103: Environmental and sustainability ppt 4

Quiz

•

10th Grade

49 questions

EPA 608 core generated practice test.

Quiz

•

9th - 12th Grade

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

20 questions

Figurative Language Review

Quiz

•

6th Grade

Discover more resources for Construction

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

10 questions

Groundhog Day Trivia Questions

Interactive video

•

3rd - 6th Grade

9 questions

Point of View

Quiz

•

3rd - 4th Grade

10 questions

Area

Quiz

•

3rd Grade

10 questions

Groundhog Behavior and Hibernation Facts

Interactive video

•

3rd - 5th Grade

20 questions

Identifying Fractions

Quiz

•

3rd Grade

EPA Sample Quiz 2

At what point would an employer be required to produce a written Health and Safety policy to be compliant with the Health and Safety at Work Act?

How would you minimise the likelihood of an accident occurring during a construction project?

What actions should you take if you discover a fire on a building site?

For what reason must LPG Cylinders be stored in a cage, open to the outside air?

What access equipment would you select to repair a leaking gutter joint on a house?

The proprietary support system would enable a worker to operate safely when working where?

What check would you undertake on a 110-volt power tool before commencing work with it?

What pipework material would the fitting in the image be used to connect to?

What is the name of the pipe clip in the image?

The SI unit Kelvin is used to measure what value?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Construction