152 revision #5

Why would the engine shown in the image not be a four cylinder inline engine?

• Piston 1 and 4 are not at TDC

• Only piston 1 and 2 are visible

• Piston 2 and 3 are not at TDC

• All piston should be visible

Which type of lightly vehicle will the component shown in the image be fitted to?

• Petrol engine

• Rotary engine

• Diesel engine

• Spark ignition engine

Which one of the following components normally sits inside the sump?

• Full flow filter element

• Main oil delivery gallery

• Primary oil filter gaze

• Hydraulic oil valve lifter

Which one of the following components would only be associated with dry-sump lubrication systems?

• Scavenge pump.

• Pressure relief valve.

• Distributor pump.

• Oil filter.

What does a dry sump lubrication system used on some performance vehicle prevent?

• Loss of oil from the pickup pipe due to vehicle movement

• Excess oil from entering the pickup pipe due to vehicle movement

• Turbo spindle seizure

• Excessive turbo lubrication

Which one of the following vehicle types would commonly have a dry sump lubrication system fitted?

• Heavy goods vehicles

• People carriers

• Specialist sport cars

• Light utility vehicles

The vehicle interior heater is controlled by allowing coolant to flow through controlling valves and the?

• Evaporator

• Condenser

• Heater matrix

• Manual heater switch

What are the components being lubricated in the diagram shown?

• Big end bearing and crankshaft.

• Camshaft and rocker arm.

• Main bearing and crankshaft.

• Push-rod and exhaust valve.

When an oil pump has failed, the condition of which two components must also be checked?

• Flywheel face and piston rings

• Pistons and flywheel face

• Main bearings and sump gasket

• Main and big end bearing

What must be carried out to the cooling system after the replacement of any major components?

• Stamp the service book

• Renew the drive belt

• Bleed the system

• Flow test the radiator