Copper pipework CP-1

List 3 Tools that you would use for measuring and marking out.

• Pipe Bender/Adjustable spanner/File

• Tape measure / Hacksaw / Blowtorch

• Pencil / Pipe Slice / Spirt Level

• Tape Measure / Pencil / Spirt Level

Which of the following two pipe sizes are most commonly found in domestic plumbing systems

• 15mm/22mm

• 32mm/40mm

• 1/2inch 3/4 inch

• 28mm/35mm

An Integral soldering fitting used to reduce a larger pipe to a smaller pipe

• 
• 
• 
• 

An end feed soldered fitting that would join three pipes,one smaller than the other two

• 
• 
• 
• 

The Information required to fabricate copper pipe to a given dimension is called ​ (a)  

• Pipe work installation drawing
• Location plan 
• Material schedule 
• Bill of quantities 

A pipework installation drawing is often accompanied by a ​ (a)  

• Material schedule
• Location plan 
• Pipework installation plan 
• Bill of quantities 

Check that the pipe ​ (a)   are free from ​ (b)   before cutting

• ends
• damage
• Tape measure 
• 700mm

Using a ​ (a)   and a pencil, mark a line at a distance of ​ (b)   on the 2m length of pipe.

• tape measure
• 700mm
• ends 
• Spirit level

Check that the hacksaw ​ (a)   is fitted correctly with the ​ (b)   pointing ​ (c)  

• blade
• teeth
• forward
• square 
• internally

Carefully cut the pipe ensuring that the end of the pipe is ​ (a)   and de-burr the pipe ​ (b)   and externally using a​ (c)  

• square
• internally
• file
• forward 
• blade