Science STAAR Release

Which two switches can be open and still allow all of the parts to work?

• Switches 1 and 3

• Switches 1 and 4

• Switches 2 and 3

• Switches 3 and 4

Tags

NGSS.4-PS3-2

NGSS.3-5-ETS1-2

Which LEDs produce light when the switch is in the position shown?

• LEDs 1, 3 and 4 only

• LEDs 1, 2, 3 and 4

• LEDs 3 and 4 only

• LEDs 1, 3, 4, and 5

Tags

NGSS.4-PS3-2

Which procedure would most likely allow the bulbs to light?

• Open the switch and then connect the two wires that are attached to the wood block

• Switch the positions of the two wires that are connected to the battery and then open the switch

• Move the switch closer in the circuit to the battery

• Connect the two wires that are attached to the wood block

Tags

NGSS.4-PS3-2

When the student connects the wires as shown, which of the bells will ring?

• Bell 1 only

• Bells 1 and 4 only

• Bells 3 and 4 only

• Bells 1, 2, 3, and 4

Tags

NGSS.MS-ETS1-1

Which circuit shown will produce light when the switch is closed?

• A

• B

• C

• D

Tags

NGSS.4-PS3-2

What object can be used at Position K for the buzzer to sound when Switch K is closed?

• A power source

• An insulated wire

• Another bulb

• Another switch

Tags

NGSS.MS-ETS1-2

NGSS.MS-PS3-5

A student wants to build a circuit with four lightbulbs and one bell. The student wants to place a switch in the circuit so that only one light will still be on and the bell will still ring when the switch is opened.

Which of these circuits should the student build?

• 
• 
• 
• 

Tags

NGSS.MS-ETS1-1

NGSS.MS-ETS1-2

In some circuits that are used for decorating, one burned-out lightbulb will prevent all the other lightbulbs from lighting. In other circuits, one burned-out lightbulb will have no effect on the other lightbulbs.

In which of these circuits will the other lightbulbs still light even if one bulb is burned out?

• 
• 
• 
• 

What does the picture demonstrate about light?

• Light travels in straight lines.

• Light cannot reflect from more than one surface.

• Light can curve through objects.

• Light can curve around objects.

Tags

NGSS.MS-PS4-2

A student conducts an investigation by shining a flashlight toward a flat mirror. The student changes the angle of the mirror and observes the path of the reflected light.

As the mirror changes direction, the light reaching the mirror cab reach the ceiling because the light -

• travels in straight lines and reflects from the surface of the mirror.

• refracts in the glass of the mirror and is spread out all over the room.

• enters the mirror and changes direction when it is refracted by the back of the mirror.

• travels through air and does not change its direction in air.

Tags

NGSS.MS-PS4-2