Which kind of message is sent by a DHCP client when its IP address lease has expired?

a DHCPREQUEST broadcast message

a DHCPDISCOVER broadcast message

What is one indication that a Windows computer did not receive an IPv4 address from a DHCP server?

The computer receives an IP address that starts with 169.254.

The computer cannot ping 127.0.0.1.

Windows displays a DHCP timeout message.

The computer cannot ping other devices on the same network with IP addresses in the 169.254.0.0/16 range.

A small coffee shop is offering free Wi-Fi to customers. The network includes a wireless router and a DSL modem that is connected to the local phone company. What method is typically used to configure the connection to the phone company?

Set the WAN connection in the wireless router as a DHCP client.

Set the connection between the wireless router and the DSL modem as a private IP network.

Set the DSL modem as a DHCP client to get a public IP address from the wireless router.

Set the DSL modem as a DHCP client to the phone company and a DHCP server for the internal connection.

A client device on an Ethernet segment needs an IP address in order to communicate on the network. A DHCP server with IP address 192.168.1.1 has been configured and enabled on the network. How will a client device obtain a usable IP address for this network?

Send a DHCPDISCOVER message to physical address FF-FF-FF-FF-FF-FF.

Send a DHCPACK packet to the default gateway address.

Use a statically configured IP address from the pool of IP addresses that is offered by the DHCP server.

Send a DHCPREQUEST packet to IP address 255.255.255.255.

What is an advantage of configuring a Cisco router as a relay agent?

It can provide relay services for multiple UDP services.

It reduces the response time from a DHCP server.

It can forward both broadcast and multicast messages on behalf of clients.

It will allow DHCPDISCOVER messages to pass without alteration.

Which statement is true about DHCP operation?

When a device that is configured to use DHCP boots, the client broadcasts a DHCPDISCOVER message to identify any available DHCP servers on the network.

A client must wait for lease expiration before it sends another DHCPREQUEST message.

If the client receives several DHCPOFFER messages from different servers, it sends a unicast DHCPREQUEST message to the server from which it chooses to obtain the IP information.

The DHCPDISCOVER message contains the IP address and subnet mask to be assigned, the IP address of the DNS server, and the IP address of the default gateway.

A network administrator configures a router to send RA messages with M flag as 0 and O flag as 1. Which statement describes the effect of this configuration when a PC tries to configure its IPv6 address?

It should use the information that is contained in the RA message and contact a DHCPv6 server for additional information.

It should contact a DHCPv6 server for the prefix, the prefix-length information, and an interface ID that is both random and unique.

It should use the information that is contained in the RA message exclusively.

It should contact a DHCPv6 server for all the information that it needs.

Refer to the exhibit. What should be done to allow PC-A to receive an IPv6 address from the DHCPv6 server?

Add theipv6 dhcp relaycommand to interface Fa0/0.

Change the ipv6 nd managed-config-flag command to ipv6 nd other-config-flag.

Configure the ipv6 nd managed-config-flag command on interface Fa0/1.

Add the IPv6 address 2001:DB8:1234:5678::10/64 to the interface configuration of the DHCPv6 server.

Refer to the exhibit. A network administrator is implementing the stateless DHCPv6 operation for the company. Clients are configuring IPv6 addresses as expected. However, the clients are not getting the DNS server address and the domain name information configured in the DHCP pool. What could be the cause of the problem?

The router is configured for SLAAC operation.

The DNS server address is not on the same network as the clients are on.

The GigabitEthernet interface is not activated.

The clients cannot communicate with the DHCPv6 server, evidenced by the number of active clients being 0.

A company uses the SLAAC method to configure IPv6 addresses for the employee workstations. Which address will a client use as its default gateway?

the link-local address of the router interface that is attached to the network

the global unicast address of the router interface that is attached to the network

the unique local address of the router interface that is attached to the network

the all-routers multicast address

Refer to the exhibit. A network administrator is configuring a router for DHCPv6 operation. Which conclusion can be drawn based on the commands?

The router is configured for stateless DHCPv6 operation.

The router is configured for stateful DHCPv6 operation, but the DHCP pool configuration is incomplete.

The DHCPv6 server name is ACAD_CLASS.

Clients would configure the interface IDs above 0010.

A network administrator is analyzing the features that are supported by different first-hop router redundancy protocols. Which statement describes a feature that is associated with HSRP?

HSRP uses active and standby routers.

It allows load balancing between a group of redundant routers.

It uses ICMP messages in order to assign the default gateway to hosts.

Refer to the exhibit. Which destination MAC address is used when frames are sent from the workstation to the default gateway?

MAC address of the virtual router

MAC address of the standby router

MAC addresses of both the forwarding and standby routers

MAC address of the forwarding router

After a host has generated an IPv6 address by using the DHCPv6 or SLAAC process, how does the host verify that the address is unique and therefore usable?

The host sends an ICMPv6 neighbor solicitation message to the DHCP or SLAAC-learned address and if no neighbor advertisement is returned, the address is considered unique.

The host sends an ICMPv6 echo request message to the DHCPv6 or SLAAC-learned address and if no reply is returned, the address is considered unique.

The host checks the local neighbor cache for the learned address and if the address is not cached, it it considered unique.

The host sends an ARP broadcast to the local link and if no hosts send a reply, the address is considered unique.

Which statement describes HSRP?

It is used within a group of routers for selecting an active device and a standby device to provide gateway services to a LAN.

It uses ICMP to allow IPv4 hosts to locate routers that provide IPv4 connectivity to remote IP networks.

If the virtual router master fails, one router is elected as the virtual router master with the other routers acting as backups.

It is an open standard protocol.

A company uses DHCP servers to dynamically assign IPv4 addresses to employee workstations. The address lease duration is set as 5 days. An employee returns to the office after an absence of one week. When the employee boots the workstation, it sends a message to obtain an IP address. Which Layer 2 and Layer 3 destination addresses will the message contain?

FF-FF-FF-FF-FF-FF and 255.255.255.255

both MAC and IPv4 addresses of the DHCP server

FF-FF-FF-FF-FF-FF and IPv4 address of the DHCP server

MAC address of the DHCP server and 255.255.255.255

Which command will allow a network administrator to check the IP address that is assigned to a particular MAC address?

Router# show running-config I section_dhcp

Router# show ip dhcp server statistics

What is the reason that an ISP commonly assigns a DHCP address to a wireless router in a SOHO environment?

easy configuration on ISP firewall

What information can be verified through the show ip dhcp binding command?

the IPv4 addresses that are assigned to hosts by the DHCP server

that DHCPv4 discover messages are still being received by the DHCP server

the IPv4 addresses that have been excluded from the DHCPv4 pool

the number of IP addresses remaining in the DHCP pool

What is the result of a network technician issuing the command ip dhcp excluded-address 10.0.15.1 10.0.15.15 on a Cisco router?

The Cisco router will exclude 15 IP addresses from being leased to DHCP clients.

The Cisco router will exclude only the 10.0.15.1 and 10.0.15.15 IP addresses from being leased to DHCP clients.

The Cisco router will automatically create a DHCP pool using a /28 mask.

The Cisco router will allow only the specified IP addresses to be leased to clients.

What is a result when the DHCP servers are not operational in a network?

Workstations are assigned with IP addresses in the 169.254.0.0/16 network.

Workstations are assigned with the IP address 127.0.0.1.

Workstations are assigned with IP addresses in the 10.0.0.0/8 network.

Workstations are assigned with the IP address 0.0.0.0.

Cspring7-9

Quiz

•

Computers

•

University

•

Practice Problem

•

Hard

David Berryman

Used 1+ times

FREE Resource

49 questions

Show all answers

1.

MULTIPLE SELECT QUESTION

30 sec • 1 pt

A DHCP-enabled client PC has just booted. During which two steps will the client PC use broadcast messages when communicating with a DHCP server? (Choose two.)

DHCPDISCOVER

DHCPACK

DHCPOFFER

DHCPREQUEST

DHCPNAK

2.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

An administrator issues the commands: Router(config)# interface g0/1 Router(config-if)# ip address dhcp What is the administrator trying to achieve?

configuring the router to act as a DHCPv4 server

configuring the router to obtain IP parameters from a DHCPv4 server

configuring the router to act as a relay agent

configuring the router to resolve IP address conflicts

3.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

When a client is requesting an initial address lease from a DHCP server, why is the DHCPREQUEST message sent as a broadcast?

The client does not yet know the IP address of the DHCP server that sent the offer.

The DHCP server may be on a different subnet, so the request must be sent as a broadcast.

The client does not have a MAC address assigned yet, so it cannot send a unicast message at Layer 2.

The client may have received offers from multiple servers, and the broadcast serves to implicitly decline those other offers.

4.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which DHCP IPv4 message contains the following information? Destination address: 255.255.255.255 Client IPv4 address: 0.0.0.0 Default gateway address: 0.0.0.0 Subnet mask: 0.0.0.0

DHCPACK

DHCPDISCOVER

DHCPOFFER

DHCPREQUEST

5.

MULTIPLE SELECT QUESTION

30 sec • 1 pt

Which protocol automates assignment of IP addresses on a network, and which port number does it use? (Choose two.)

DHCP

DNS

SMB

53

67

6.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Refer to the exhibit. PC1 is configured to obtain a dynamic IP address from the DHCP server. PC1 has been shut down for two weeks. When PC1 boots and tries to request an available IP address, which destination IP address will PC1 place in the IP header?

192.168.1.1

192.168.1.255

255.255.255.255

192.168.1.8

7.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which message does an IPv4 host use to reply when it receives a DHCPOFFER message from a DHCP server?

DHCPOFFER

DHCPDISCOVER

DHCPREQUEST

DHCPACK

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

50 questions

ITC 112 - Topic 2 Quiz

Quiz

•

University

52 questions

computer memory and storage

Quiz

•

University

50 questions

IUTCS Freshers

Quiz

•

University

50 questions

Computer System Servicing

Quiz

•

University

50 questions

Quiz

•

University

50 questions

MS Excel Quiz

Quiz

•

University

53 questions

EEP

Quiz

•

University

52 questions

webdev ii

Quiz

•

University

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

20 questions

Figurative Language Review

Quiz

•

6th Grade

Discover more resources for Computers

30 questions

Quiz 1 Review

Quiz

•

University

Cspring7-9

49 questions

A DHCP-enabled client PC has just booted. During which two steps will the client PC use broadcast messages when communicating with a DHCP server? (Choose two.)

An administrator issues the commands: Router(config)# interface g0/1 Router(config-if)# ip address dhcp What is the administrator trying to achieve?

When a client is requesting an initial address lease from a DHCP server, why is the DHCPREQUEST message sent as a broadcast?

Which DHCP IPv4 message contains the following information? Destination address: 255.255.255.255 Client IPv4 address: 0.0.0.0 Default gateway address: 0.0.0.0 Subnet mask: 0.0.0.0

Which protocol automates assignment of IP addresses on a network, and which port number does it use? (Choose two.)

Refer to the exhibit. PC1 is configured to obtain a dynamic IP address from the DHCP server. PC1 has been shut down for two weeks. When PC1 boots and tries to request an available IP address, which destination IP address will PC1 place in the IP header?

Which message does an IPv4 host use to reply when it receives a DHCPOFFER message from a DHCP server?

Which command, when issued in the interface configuration mode of a router, enables the interface to acquire an IPv4 address automatically from an ISP, when that link to the ISP is enabled?

Which kind of message is sent by a DHCP client when its IP address lease has expired?

A host PC is attempting to lease an address through DHCP. What message is sent by the server to let the client know it is able to use the provided IP information?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Computers