Set up and operate a circular saw

Which one of the following specifically covers the use of work equipment?

• PUWER.

• COSHH.

• RIDDOR.

• HASAWA.

What is the circular saw component shown in the image below?

• Carbon bush.

• Top guard.

• Riving knife.

• Blade shim.

Which part is the depth adjustment on the image below?

• 1

• 2

• 3

• 4

Which one of the following would be a fault with a circular saw?

• Top guard close to work piece.

• Rip fence pulled back during cross cutting.

• Lubricant covering the saw bed.

• Riving knife thinner than body of the saw blade.

Which one of the following should be done first if a fault is found with a circular saw?

• Write to the supplier.

• Erect a security barrier to prevent access.

• Isolate the machine.

• Write to the maintenance company.

Which one of the following is described as fixed extraction?

• A vacuum that is used around the bench.

• An attached dust bag.

• Leaving windows open.

• Ducting running to a single point.

What is the main reason for the use of dust extraction?

• To reduce debris build-up in the machine.

• To collect shavings for future use.

• To blow dust away from the work piece.

• To produce noise to warn others the saw is in use.

Which one of the following is the correct push stick to use with a circular saw?

• 300 mm long.

• 450 mm long.

• 300 mm long.

• 450 mm long.

What is the sawing aid shown in the image below?

• Wedge jig.

• Saddle.

• Firring jig.

• Fillet.

When ripping, what guard on a circular saw stops human contact with the blade?

• Top.

• Shaw.

• Bridge.

• Cage.