14.6.2 Module Quiz - Routing Concepts

What table does a router use to determine how to forward an IP packet?

• ARP table

• MAC address table

• Neighbor cache

• Routing table

What action will a router take on a packet with a destination IP address that is on a remote network?

• It will forward the packet directly to the device with the destination IP address of the packet.

• It will forward the packet to a next-hop router.

• It will forward the packet to an Ethernet switch.

• It will drop the packet.

Which of the following routes may be found in a routing table? (Choose all that apply.)

• Directly connected networks

• Static routes

• Dynamic routing protocol routes

• Default route

What is used to determine the minimum number of far-left bits that must match between the prefix in the route entry and the destination IP address.

• Prefix length in the routing table entry

• Prefix length of the destination IP address

• The classful address of the network address

If a router needs to send an ARP Request for the destination IPv4 address of the packet, this means the packet will be forwarded:

• To a next-hop router

• To the device with the destination IPv4 address of the packet

If a router needs to send an ARP Request for the IPv4 address in one of its route entries, this means the packet will be forwarded:

• To a next-hop router

• To the device with the destination IPv4 address of the packet

Which packet forwarding method is used by default on Cisco routers?

• Process switching

• Fast switching

• Cisco Express Forwarding

• Ethernet switching

Which routing table principle is not correct?

• Every router makes its decision alone, based on the information it has in its own routing table.

• The fact that one router has certain information in its routing table does not mean that other routers have the same information.

• Routing information about a path from one network to another also provides routing information about the reverse, or return, path.

Which route entry would be used for a packet with a destination IP address that matches an IP address of one of the router interfaces?

• C for Directly Connected

• L for Local

• S for Static

• Depends on the source of the route

What type of network is accessed by a single route and the router has only one neighbor?

• Stub network

• Directly connected network

• Next-hop network

• Local network