Scroll Saw Operation and Safety

Where is the on/off switch for the scroll saw typically located?

• On the side of the machine

• Underneath the table

• On top of the machine

• At the back of the machine

What is the recommended distance for the safety guard above the material being cut?

• 1/4 inch

• 1/2 inch

• 1/8 inch

• As close as possible without touching

On which side of the scroll saw is the adjusting knob for the safety guard located?

• Right-hand side

• Front

• Back

• Left-hand side

To tighten the safety guard after adjustment, which direction should the adjusting knob be turned?

• To the left

• To the right

• Clockwise

• Counter-clockwise

What percentage is the recommended speed setting for the scroll saw?

• 50%

• 75%

• 100%

• 25%

Where is the speed dial located on the scroll saw?

• Below the on/off switch

• On the side of the machine

• Above the on/off switch

• On the front panel

If the speed dial goes up to 8, what value approximately corresponds to 75% speed?

• 4.5

• 6.5

• 7.0

• 8.0

What is the primary use of a scroll saw?

• Cutting straight lines

• Cutting curves

• Sanding wood

• Drilling holes

What is the minimum safe distance your fingers should be from the scroll saw blade?

• 1 inch

• 2 inches

• 3 inches

• As close as needed

What tool should be used if your fingers need to be closer than 2 inches to the blade?

• A clamp

• A push stick

• Gloves

• Pliers