
ERT TCMM - PFRC - SOAL URUT 801-900 (ID & EN) (PAGI)
Authored by Alif Danang Satria Wisesa
Other
Vocational training
Used 1+ times

AI Actions
Add similar questions
Adjust reading levels
Convert to real-world scenario
Translate activity
More...
Content View
Student View
100 questions
Show all answers
1.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Apa pertimbangan keselamatan saat menggunakan perkakas listrik saat masuk secara paksa? // What is a safety consideration when using power tools during forcible entry?
Gergaji tajam lebih mungkin menyebabkan kecelakaan daripada gergaji tumpul // A sharp saw is more likely to cause an accident than a dull one
Ingatlah bahwa bilah pisau pada rotary saw terus berputar setelah throttle dilepaskan // Remember that the blade on a rotary saw continues to spin after the throttle has been released
Mulai semua pemotongan dengan putaran rendah per menit (rpm) untuk mencegah bilah tersangkut ke bahan // Start all cuts at low revolutions per minute (rpm) to prevent the blades from binding into the material
Gunakan hanya gergaji bertenaga listrik saat bekerja di lingkungan yang mudah terbakar atau di dekat cairan yang mudah terbakar // Use only electric powered saws when working in a flammable atmosphere or near flammable liquids
2.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Apa yang BUKAN merupakan masalah keamanan saat menggunakan perkakas listrik saat masuk secara paksa? // What is NOT a safety concern when using power tools during forcible entry?
Gunakan hanya bilah komposit pada rotary saws // Use only composite blades on rotary saws
Jauhkan orang yang tidak terlindungi dan tidak penting dari area kerja // Keep unprotected and nonessential people out of the work area
Simpan bilah komposit di kompartemen di mana asap bensin tidak akan menumpuk // Store composite blades in compartments where gasoline fumes will not accumulate
Saat melakukan pemotongan, perhitungkan puntiran (efek giroskopik atau torsi) dari mata gergaji putar // When making cuts, account for the twisting (gyroscopic or torsion effect) of a rotary saw blade
3.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Jenis alat apa yang harus dibawa dengan kepala alat di bawah, dekat dengan tanah, dan di depan badan saat berada di luar bangunan? // What type of tool should be carried with the tool head down, close to the ground, and ahead of the body when outside a structure?
Kapak // Axes
Alat-alat listrik // Power tools
Alat mencongkel // Prying tools
Pike poles dan hooks // Pike poles and hooks
4.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Alat masuk paksa yang rusak atau aus berlebihan harus? // Forcible entry tools that are damaged or excessively worn should be?
Ditinggalkan di station // Left at the station
Dihapus dari layanan // Removed from service
Dipindahkan dari apparatus // Taken off the apparatus
Dibuang segera // Disposed of immediately
5.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Apa pedoman perawatan dan pemeliharaan gagang kayu alat masuk paksa? // What is a care and maintenance guideline for the wooden handles of forcible entry tools?
Periksa ketatnya kepala alat // Check the tightness of the tool head
Ampelas gagangnya setiap hari untuk menghilangkan serpihan // Sand the handle daily to eliminate splinters
Rendam pegangan dalam air sabun hangat jika terlalu kotor // Soak the handle in warm, soapy water if it is excessively dirty
Oleskan pernis untuk mengawetkannya dan untuk mencegah kekasaran dan bengkok // Apply varnish to preserve it and to prevent roughness and warping
6.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Apa instruksi umum untuk perawatan permukaan logam yang tidak terlindungi pada alat masuk paksa? // What is a general instruction for the care of unprotected metal surfaces on forcible entry tools?
Olesi permukaan logam sedikit dengan minyak biji rami rebus // Oil the metal surface lightly with boiled linseed oil
Gunakan kain emery atau wol baja untuk menghilangkan kotoran dan karat // Use an emery cloth or steel wool to remove dirt and rust
Gunakan tang untuk menghilangkan gerinda dari ujung cutter dan badan // Use pliers to remove burrs from the cutting edge and body
Oleskan wax coating tipis secara menyeluruh ke permukaan logam setiap tahun // Apply a thin coat of wax completely to the metal surface annually
7.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Saat memilih opsi terbaik untuk memaksa masuk melalui pintu, pastikan untuk memulai dengan? // When choosing the best option to force entry through a door, make sure to begin with?
Kekuatan sebanyak mungkin untuk membuka pintu dengan cepat // As much force as possible to open the door quickly
Gunakan hanya satu alat, seperti kapak berkepala datar, dan tambahkan lebih banyak jika diperlukan // Using only one tool, such as a flat-head axe, and add more if needed
Jumlah kerusakan minimum dan melanjutkan ke jumlah maksimum // The minimum amount of damage and proceed to the maximum amount
Perkakas tangan, seperti Halligan dan kapak berkepala datar, dan pindah ke perkakas listrik jika perlu // Hand tools, such as a Halligan and a flat-head axe, and move to power tools if necessary
Access all questions and much more by creating a free account
Create resources
Host any resource
Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever
or continue with

Microsoft
%20(1).png)
Apple
Others
Already have an account?