Which statement describes a syslog message severity level?

Severity level 0 is the most critical severity level.

A syslog alarm with a severity level of 7 indicates an emergency situation that can render the system unusable.

A syslog alarm at the severity level 4 and higher is sent to an external syslog server by default.

A severity level 7 message is only accessible through the terminal line.

What is an SNMP management agent?

software that is installed on devices managed by SNMP

a database that a device keeps about network performance

a communication protocol that is used by SNMP

a computer loaded with management software and used by an administrator to monitor a network

What are two characteristics of SNMP community strings? (Choose two.)

SNMP read-only community strings can be used to get information from an SNMP-enabled device.

SNMP read-write community strings can be used to set information on an SNMP-enabled device.

If the manager sends a correct read-only community string, it can get and set information in an agent.

Commonly known community strings should be used when configuring secure SNMP.

A vulnerability of SNMPv1, SNMPv2, and SNMPv3 is that they send the community strings in plaintext.

A network administrator issues the 'copy tftp running-config' command on a router. What is being achieved?

copy the configuration file from the TFTP server to the RAM of the router

copy the configuration file from the RAM of the router to the TFTP server

copy the configuration file from the NVRAM of the router to the TFTP server

copy the configuration file from the TFTP server to the NVRAM of the router

What is a characteristic of the MIB?

The OIDs are organized in a hierarchical structure.

Information is organized in a flat manner so that SNMP can access it quickly.

Information in the MIB cannot be changed.

A separate MIB tree exists for any given device in the network.

What data would be saved and where if 'copy startup-config tftp' is executed? (Choose two.)

The data will be saved to a TFTP server.

The data to be saved is the configuration that is stored in NVRAM.

The data to be saved is the configuration that is stored on a TFTP server.

The data to be saved is the configuration that is being modified in RAM.

Which command restores the IOS image 'c1900-universalk9-mz.SPA.152-4.M3.bin' to a router?

copy c1900-universalk9-mz.SPA.152-4.M3.bin tftp:

copy flash0: c1900-universalk9-mz.SPA.152-4.M3.bin

Why issue 'show cdp neighbors' on a router?

to display device ID and other information about directly connected Cisco devices

to display line status and other information about directly connected Cisco devices

to display routing table and other information about directly connected Cisco devices

to display router ID and other information about OSPF neighbors

What are SNMP trap messages?

unsolicited messages that are sent by the SNMP agent and alert the NMS to a condition on the network

messages that are sent periodically by the NMS to the SNMP agents to query the device for data

messages that are used by the NMS to query the device for data

messages that are used by the NMS to change configuration variables in the agent device

Which is one difference between CDP and LLDP?

CDP is a proprietary protocol, whereas LLDP is a vendor-neutral protocol.

CDP can gather information from routers, switches, and wireless APs, whereas LLDP can only gather information from routers and switches.

CDP can obtain both Layer 2 and Layer 3 information, whereas LLDP can only obtain Layer 2 information.

CDP is enabled on an interface using two commands, while LLDP requires only one command.

Which option correctly enables LLDP on an interface?

R1(config-if)# lldp receive R1(config-if)# lldp transmit

R1(config-if)# lldp enable R1(config-if)# lldp receive

R1(config-if)# lldp enable R1(config-if)# lldp receive R1(config-if)# lldp transmit

What are the most common syslog messages?

Error messages about hardware or software malfunctions

Output messages that are generated from debug output

Messages when a packet matches a parameter condition in an ACL

What is the result of configuring the 'logging trap 4' global configuration command?

The syslog client sends to the syslog server any event message that has a severity level of 4 or lower.

The syslog client sends to the syslog server event messages with an identification trap level of only 4.

The syslog client sends to the syslog server any event message that has a severity level of 4 or higher.

After four events, the syslog client sends an event message to the syslog server.

The 'ntp server 10.1.1.1' global configuration command is issued on R1. What impact does this command have?

Synchronizes the clock of R1 with the time server at IP address 10.1.1.1

Identifies the NTP server that R1 will send system log messages to

Identifies the NTP server that R1 will use to store backup configurations

Identifies R1 as the NTP server using IP address 10.1.1.1

Which two statements are true about NTP servers in an enterprise network? (Choose two.)

NTP servers at stratum 1 are directly connected to an authoritative time source.

NTP servers ensure an accurate timestamp on logging and debugging information.

All NTP servers synchronize directly to a stratum 1 time source.

NTP servers control the mean time between failures (MTBF) for key network devices.

There can be only one NTP server on an enterprise network.

What can a network administrator do to access a router if the password has been lost?

From ROMMON mode, configure the router to ignore the startup configuration when the router initializes.

Access the router remotely through Telnet and use 'show running-config'.

Boot the router into ROMMON mode and reinstall IOS from a TFTP server.

Reboot the router and use the break key sequence to bypass the password during IOS bootup.

Which two conditions should be verified before upgrading a Cisco IOS image using a TFTP server? (Choose two.)

Verify connectivity between the router and TFTP server by using the ping command.

Verify that there is enough flash memory for the new Cisco IOS image by using the show flash command.

Verify that the checksum for the image is valid by using the show version command.

Verify that the TFTP server is running by using the tftpdnld command.

Verify the name of the TFTP server by using the show hosts command.

Which statement describes SNMP operation?

The NMS uses a set request to change configuration variables in the agent device.

The SNMP agent uses a get request to query the device for data.

An NMS polls agents by using traps to query devices for data.

An agent on a managed device stores information remotely in the MIB located on the NMS.

Module 10 Questions Quiz

40 questions

Show all answers

1.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which protocol is used to gather information about Cisco devices which share the same data link?

CDP

LLDP

2.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Which protocol works with network devices (routers, switches, WLAN APs) across multiple manufacturers’ devices?

CDP

LLDP

3.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Refer to the syslog output. What security (severity) level generated the message?

Error

Informational

Warning

Debugging

4.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Refer to the syslog output. What is the mnemonic for this syslog message?

IFMGR

Unable to open nvram

NO_IFINDEX_FILE

ifIndex-table

5.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Refer to the syslog output. What is the syslog reporting facility?

IFMGR

NO_IFINDEX_FILE

IFMGR-7

ifIndex-table

6.

MULTIPLE SELECT QUESTION

30 sec • 1 pt

What are two reasons to issue 'copy running-config tftp' on a switch or router? (Choose two.)

to force an automatic reload of the device

to have a backup of the running configuration file in the router

to overwrite the current configuration

to transfer the current configuration file to a server

to save the running configuration file to a remote location

7.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

What info can 'show cdp neighbors detail' reveal that 'show cdp neighbors' cannot?

the platform that is used by the neighbor

the IP address of the neighbor

the capabilities of the neighbor

the hostname of the neighbor

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

36 questions

Unit -3 cyber Ethics and Software

Quiz

•

10th Grade - University

35 questions

[AP CSP] Programming with Conditionals [If, Elif, Else]

Quiz

•

9th Grade - University

44 questions

Data Structures Quiz

Quiz

•

University

40 questions

Eng-103 Vocab1

Quiz

•

University

39 questions

U5 Vocab

Quiz

•

University

40 questions

Introduction to Computer

Quiz

•

University

40 questions

ASSESSMENT 2: OVERVIEW OF ICT & REVIEW ON COMPUTER FUNDAMENTALS

Quiz

•

University

35 questions

Computer Hardware Basics

Quiz

•

University

Popular Resources on Wayground

20 questions

"What is the question asking??" Grades 3-5

Quiz

•

1st - 5th Grade

20 questions

“What is the question asking??” Grades 6-8

Quiz

•

6th - 8th Grade

10 questions

Fire Safety Quiz

Quiz

•

12th Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

34 questions

STAAR Review 6th - 8th grade Reading Part 1

Quiz

•

6th - 8th Grade

20 questions

“What is the question asking??” English I-II

Quiz

•

9th - 12th Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

47 questions

8th Grade Reading STAAR Ultimate Review!

Quiz

•

8th Grade

Discover more resources for Computers

15 questions

LGBTQ Trivia

Quiz

•

University

36 questions

8th Grade US History STAAR Review

Quiz

•

KG - University

25 questions

5th Grade Science STAAR Review

Quiz

•

KG - University

16 questions

Parallel, Perpendicular, and Intersecting Lines

Quiz

•

KG - Professional Dev...

20 questions

5_Review_TEACHER

Quiz

•

University

10 questions

Applications of Quadratic Functions

Quiz

•

10th Grade - University

10 questions

Add & Subtract Mixed Numbers with Like Denominators

Quiz

•

KG - University

20 questions

Block Buster Movies

Quiz

•

10th Grade - Professi...

Module 10 Questions

Which protocol is used to gather information about Cisco devices which share the same data link?

Which protocol works with network devices (routers, switches, WLAN APs) across multiple manufacturers’ devices?

Refer to the syslog output. What security (severity) level generated the message?

Refer to the syslog output. What is the mnemonic for this syslog message?

Refer to the syslog output. What is the syslog reporting facility?

What are two reasons to issue 'copy running-config tftp' on a switch or router? (Choose two.)

What info can 'show cdp neighbors detail' reveal that 'show cdp neighbors' cannot?

When SNMPv1 or SNMPv2 is being used, which feature provides secure access to MIB objects?

What command must be issued on a Cisco router that will serve as an authoritative NTP server?

Which protocol or service can be configured to send unsolicited messages to alert a network administrator about events (e.g., high CPU)?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Computers