NEW
Font size
S
M
L
XL
WorksheetsRouter Safety
Total questions: 20
Worksheet time: 19mins
Name
Class
Date
1.
Before you change the setting on the router/power plane/biscuit cutter, the cord must be
a)
clean
b)
in a vise
c)
unplugged
d)
fray (worn)
2.
When you use the portable router or biscuit cutter, you must
a)
have a good hold on it
b)
hold it in a vise
c)
let it guide itself
d)
hold it by one hand knob
3.
You should feed the router into the material
a)
at a moderate speed
b)
as fast as you can without slowing the router
c)
fast enough to cut the motor speed in half
d)
at any speed
4.
For tightening bits or cutters in the router, you must use a special _________________, not a pair of pliers.
a)
screwdriver
b)
mallet
c)
wrench
d)
tool rest
5.
When using the router table, you must follow the ____________ of feed arrows drawn on the table.
a)
direction
b)
speed
6.
When using a portable router, power plane, or biscuit cutter your wood should be
a)
securely held down to the bench
b)
in your hand
c)
securely held down by a neighbor
d)
none of these are correct
7.
Before plugging the line cord on a portable router, power plane, or biscuit cutter, make sure the switch is in the _____ position.
a)
on
b)
off
8.
Never allow your hand to be closer than ___ to the router bit.
a)
1"
b)
2"
c)
4"
d)
one hand length
9.
It is safer to make multiple passes than to cut all the material in one pass.
a)
True
b)
False
10.
The router may be used with the permission of
a)
the custodian
b)
the teacher
c)
the foreman
d)
the tool clerk
11.
The guard and ______ must always be in place except for special setups.
a)
guard
b)
fence
c)
cutter
d)
table
12.
Material to be used on the router must be free from...
a)
knots, nails or other defects
b)
debt
c)
termites
d)
moisture
13.
Stock is fed into the router the direction which is opposite to the rotation of the
a)
handle
b)
operator
c)
cutter
d)
guard
14.
If the router does not operate properly
a)
turn off the machine
b)
shout for help
c)
stand still until someone notices
15.
Make adjustments on the router while the machine is
a)
running
b)
still warm
c)
coasting
d)
disconnected from the power
16.
Whenever possible, use a push _____ for feeding work through the router.
a)
broom
b)
wrench
c)
stick
d)
bar
17.
Remove all _____ from the router table before turning on the machine
a)
sawdust
b)
wax
c)
rust
d)
loose tools
18.
What is at part A?
a)
Part A is the switch
b)
Part A is the cord
c)
Part A is the depth lock
d)
Part A is the handle
19.
What is at Part E?
a)
Part E is the collet
b)
Part E is the handle
c)
Part E is the switch
d)
Part E is the depth lock
20.
What is at Part D?
a)
Part D is the collet
b)
Part D is the handle
c)
Part D is the switch
d)
Part D is the depth lock
Reset
