WorksheetsSewing Parts Test
Total questions: 24
Worksheet time: 22mins
Name
Class
Date
1.
Holds the fabric in place as you sew-raises and lowers.
a)
Take Up Lever
b)
Thread Guides
c)
Needle
d)
Presser Foot
2.
Holds upper thread in place.
a)
Thread Guide
b)
Spool Pin
c)
Bobbin Cover
d)
Take Up Lever
3.
Used to slowly lower and raise the needle manually.
a)
Guide Markers
b)
Foot Pedal
c)
Hand Wheel
d)
Speed Range Control Lever
4.
A lever that raises and lowers the presser foot
a)
Presser Foot Lifter
b)
Feed Dogs
c)
Foot Control
d)
Bobbin
5.
A small, flat spool that holds the bottom thread.
a)
Bobbin
b)
Throat Plate
c)
Foot Control
d)
Feed Dogs
6.
Which is the presser foot?
a)
1
b)
2
c)
3
7.
I carry the thread and pierce the fabric. Who am I?
a)
Needle
b)
Feed Dogs
c)
Stitch Plate
d)
Presser Foot
8.
To prevent injury when the sewing machine is operating you should:
a)
lean close to the needle to watch the stitching line
b)
be ready to pull the plug if the machine does not stop
c)
use a fast speed
d)
keep your fingers away from the needle
9.
This tool is used to remove unwanted stitches.
a)
Clippers
b)
Seam ripper
c)
Pinking shears
10.
Adjust to how many stitches per inch of sewing is desired.
a)
Stitch Length Dial
b)
Tension Dial
c)
Pattern Indicator Window
d)
Thread Guides
11.
This controls how tight or loose the stitches are
a)
length dial
b)
width dial
c)
selector
d)
tension dial
12.
When should you back stitch?
a)
never
b)
every 10 stitches
c)
everytime you start and stop
d)
every 5 stitcthes
13.
This part moves the fabric through the machine
a)
feed dogs
b)
presser foot
c)
thread guide
d)
reverse
14.
I hold the bobbin while winding the thread on. Who am I?
a)
Bobbin Case
b)
Bobbin
c)
Bobbin Winder
d)
Spool Pin
15.
The normal stitch length is _____ per inches and the stitch length dial is set on _____
a)
6 stitches, 4
b)
25 stitches, 1.5
c)
10-12 stitches, 2.5
d)
6-8 stitches, 3
16.
What is the name of "D"
a)
Stitch Length Control
b)
Hand Wheel
c)
Stitch Pattern Control
d)
Spool Pin
17.
What is the name of "B"
a)
Stitch Length Control
b)
Hand Whell
c)
Stitch Pattern Control
d)
Reverse Button
18.
What is the name of "A"
a)
Spool Pin
b)
Feed Dog
c)
Needle
d)
Reverse Button
19.
What is the name of "C"
a)
Stitch Length Control
b)
Hand Wheel
c)
Stitch Pattern Control
d)
Reverse Button
20.
In what position MUST the presser foot be in before you start to sew?
a)
Up
b)
Down
21.
The hand wheel should always be turned towards you.
a)
True
b)
False
22.
Depending on the machine, this will be a button, or a lever, that allows you to stitch backward to secure the end of a seam.
a)
Stitch Pattern Control
b)
Reverse Stitch Control
c)
Stitch Length Control
d)
Bobbin
23.
This stitch control can be adjusted to make different stitching patterns
a)
Throat Plate
b)
Stitch Pattern Control
c)
Thread Guides
d)
Foot Control
24.
What am I ?
a)
pin cushion
b)
tomato
c)
fruit
d)
cushion
100 %
