NEW
Font size
S
M
L
XL
WorksheetsDIMENSIONING TERMINOLOGY
Total questions: 30
Worksheet time: 15mins
Name
Class
Date
1.
System of dimensioning where all dimensions are placed horizontally and read from the bottom.
a)
ALIGNED
b)
LEADER
c)
UNIDIRECTIONAL
d)
CONTINUOUS
2.
The amount a dimension is allowed to vary (change). The difference between the minimum and maximum size
a)
CENTERLINE
b)
DIMENSION
c)
COUNTERBORED
d)
TOLERANCE
3.
System of dimensioning where all dimensions are placed parallel to the dimension lines and read from the bottom or right side.
a)
GENERAL
b)
UNIDIRECTIONAL
c)
LEADER
d)
ALIGNED
4.
The distance from the center to a point on the circumference of a circle or arc.
a)
DATUM
b)
DIAMETER
c)
LIMIT
d)
RADIUS
5.
Statements that give information which cannot be transmitted by views and dimensions
a)
NOTATION
b)
NOTES
c)
DIMENSION
d)
SPECIFIC NOTE
6.
The distance from one side of a circle through the center to the opposite side.
a)
CIRCUMFRANCE
b)
DIAMETER
c)
RADIUS
d)
PI (3.1419)
7.
Placing several dimensions in a straight line along an object to describe successive features.
a)
DUAL DIMENSIONING
b)
CHAIN DIMENSIONING
c)
CONVENTIONAL DIMENSIONING
d)
BASELINE DIMENSIONING
8.
Type of dimensioning that gives the overall sizes using dimension and extension lines.
a)
BASELINE
b)
CHAIN
c)
CONVENTIONAL
d)
ALIGNED
9.
Thin solid line with an arrow used to indicate the location of notes or dimensions.
a)
GENERAL NOTE
b)
LEADER LINE
c)
ALIGNED DIMENSION
d)
GENERAL DIMENSION
10.
Thin solid line drawn perpendicular to dimension lines indicating the feature dimensioned.
a)
EXTENSION LINE
b)
CENTER LINE
c)
DIMENSION LINE
d)
CONVENTIONAL DIMENSION
11.
Holes drilled for cone-shaped heads.
a)
COUNTERBORED
b)
COUNTERSUNK
c)
TAP
d)
FLATHEAD
12.
An exact point, axis, plane or surface from which features of a part are located (point of reference).
a)
RADIUS
b)
DATUM
c)
REFERENCE POINT
d)
TANGENT POINT
13.
A type of incline where the entire side is an incline.
a)
FILLET
b)
BEVEL
c)
RADIUS
d)
CHAMFER
14.
A type of incline that looks like the corner has been cut off.
a)
FILLET
b)
BEVEL
c)
RADIUS
d)
CHAMFER
15.
A number which indicates the division of one number by the other. Consists of a numerator and denominator.
a)
DIMENSION
b)
FRACTION
c)
DECIMAL
d)
DATUM
16.
Method of dimensioning with both inch and metric units.
a)
DUAL DIMENSIONING
b)
CHAIN DIMENSIONING
c)
METRIC DIMENSIONING
d)
GENERAL DIMENSIONING
17.
DIMENSION A
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
18.
DIMENSION B
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
19.
DIMENSION C
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
20.
DIMENSION D
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
21.
DIMENSION E
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
22.
DIMENSION F
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
23.
DIMENSION G
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
24.
DIMENSION H
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
25.
DIMENSION A
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
26.
DIMENSION B
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
27.
DIMENSION C
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
28.
DIMENSION D
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
29.
DIMENSION E
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
30.
DIMENSION F
a)
SIZE
b)
LOCATION
c)
DIAMETER
d)
RADIUS
Reset
