NEW
Font size
S
M
L
XL
WorksheetsIndustrial Engineering
Total questions: 60
Worksheet time: 30mins
Name
Class
Date
1.
In time and motion study, the symbol 'X' represent
a)
Crossing
b)
Opposite directional movements
c)
Rejections
d)
None of the above
2.
Which of the following is unaboidable delay?
a)
Waiting for raw material
b)
Non-availability of power
3.
In tool signature the first figure represents
a)
Back rake angle
b)
End relief angle
c)
Side relief angle
d)
Side cutting edge angle
4.
In tool signature the last figure represents
a)
Tool material
b)
Operation for which tool is made
c)
Nose radius
d)
Cutting speed
5.
With high speed steel tools the back rake angle is usually zero while machining
a)
Aluminium
b)
Brass
c)
Cast iron
d)
Hand steel
6.
In case of comented carbide tools the back rake angle is positive while machining
a)
Aluminium
b)
Brass
c)
Mild steel
d)
Carbon steel
7.
Safety guards on machines should be
a)
Always in position
b)
Put in position of desired by the operator
c)
Used if they do not reduce the production
d)
Used sometimes
8.
Bin cards are used in
a)
Machine loading
b)
Quality control
c)
Fixing targets
d)
Stores
9.
The chart used to review the overall sequence of an operation by focusing either the movement of operators or materials is called
a)
SIMO chart
b)
NEMA chart
c)
Flow process chart
d)
Gaunt chart
10.
CPM is a technique based on
a)
event
b)
event and activity
c)
neither event nor activity
d)
activity
11.
At 'break even point'
a)
Constant expenses = Profits
b)
Total sales = variable expenses
c)
Variable expenses - Profits = Total sales
d)
None of the above
12.
In a break even chart, abscissa represents
a)
Constant expenses
b)
Amount in rupee
c)
Total sales
d)
Profits
13.
By technological innovations if the cost of raw material is reduced, this will result in
a)
Increases constant expenses
b)
Lower profits
c)
Lower break even point
d)
High break even point
14.
Total sales less cost of manufacturing gives
a)
Net
b)
Gross profit
c)
Distributable profit
d)
Taxable profit
15.
In motion and time study which of the following is used in product analysis?
a)
Process chart
b)
Work place layout
c)
Man operation chart
d)
All of the above
16.
In motion and time study which of the following is used in man analysis?
a)
Man and machine analysis chart
b)
Man and maching operation time chart
c)
Man and machine, process time chart
d)
All of the above
17.
While selecting site for a regional paint, which factory services (is) are to be looked into?
a)
Water supply
b)
Sewage disposal system
c)
Availability of manpower
d)
All of the above
18.
The advantage of product layout is
a)
Lower total materials handling cost
b)
Less work-in-process
c)
Less floor area required per unit of production
d)
All of the above
19.
The advantage of process layout is
a)
Less duplication of equipment
b)
Better control of complicated or precision processes
c)
All
d)
Easier to handle breakdown of equipment
20.
In time and motion study, the symbol 'O' represents
a)
Quantity inspection
b)
Quality inspection
c)
Operation
d)
Obvious delay
21.
The basic tool in work study is
a)
Process chart
b)
Bar chart
c)
Stop watch
d)
Shop layout
22.
A product layout is generally suggested for
a)
Jobbing work
b)
Batch production
c)
Continuous production
d)
Efficien, machine utilization criteria
23.
A process layout is generally suggested for
a)
Jobbing work
b)
Batch production
c)
Planned production
d)
None of the above
24.
Standard followed in Germany are known as
a)
ASTM standards
b)
DIN standards
c)
ISI standards
d)
GOST standards
25.
UNI standards are followed in
a)
India
b)
Indonesia
c)
Italy
d)
Pakistan
26.
The standards followed in Russia are known as
a)
TASS standards
b)
GOST standards
c)
JIS standards
d)
None of these
27.
For standardisation of steel, the series used in British standards is known as
a)
A series
b)
En-series
c)
There is no such series in British standards
d)
AB series
28.
PERT analysis is based on
a)
Optimistic time
b)
Pessimistic time
c)
Most likely time
d)
All
29.
To obtain solution of material problem so that the cost of handling will be minimum is
a)
Simplex method
b)
Transport method
c)
Value engineering
d)
Queuing theory
30.
The quality of a part does NOT depend upon
a)
how cheap the part is
b)
how well the part performs its function
c)
how reliable the performance of the pan is
d)
how far the performance can be maintained
31.
Which of the following is NOT a welfare measure in a factory?
a)
Canteen
b)
Provision of cold water in summer
c)
Apprenticeship training
d)
Apprenticeship
32.
Which of the following is NOT a part of recruitment process?
a)
Group discussion
b)
Written test
c)
Exit interview
d)
Personal interview
33.
Apprenticeship training is applicable to
a)
Industries employing more than 500 workers
b)
Only medium and large industries
c)
Only large industries
d)
All industries
34.
In which operation the horse power required to remove one cubic centimetre of material (soft steel) per minute under average conditions will be maximum
a)
Turning
b)
Drilling
c)
Grinding
d)
Milling
35.
The binding material in diamond tools is
a)
Cobalt
b)
Carbon
c)
Cement
d)
None of these
36.
Which of the following tools can be turned at maximum speed?
a)
Carbon steel
b)
Sintered carbide tools
c)
Diamonds
d)
High speed steel
37.
If the life of high speed steel tools is taken as 100% the life of cemented carbide tools will be
a)
30 to 50 percent
b)
300 to 1000 percent
c)
100 to 150 percent
d)
80 to 130 percent
38.
Real wages represent
a)
The purchase power of money wages
b)
The gross wages craned by an employee
c)
The net take home wages
d)
Wages inclusive of fringe benefits
39.
Which of the following is not an incentive plan
a)
Halsey plan
b)
Taylor, 100% incentive plan
c)
Rowan plan
d)
Standard plan
40.
Which of the following is indirect cost?
a)
Cost of raw material
b)
cost of machining
c)
Training for job
d)
Power consumption in fabrication
41.
Systematic apratisal of each job in the organisation to determine its comparative value, is known as
a)
Standardization
b)
Regularization
c)
Job evaluation
d)
Job specification
42.
Which of the following is a disciplinary action
a)
Promotion
b)
Suspension
c)
Separation
d)
Training
43.
Exit interviews
a)
Are interviews held with employees intending to leave an organisation
b)
Are interviews hel outside the factory premises
c)
Are interviews of the persons working in plant, conducted outside the factory premises, to know about any grivances
d)
Are interviews held during lockout or strike period
44.
Bankrupt is one who
a)
Is visiting foreign universities now and often
b)
Surrenders all his assets to the court for distribution to his creditors and is unable to pay his debts
c)
Is unable to purchase things
d)
Is unable to sell things
45.
If the average interest rate is 12% and depreciation is to be accounted for by straight line method at 10%, which of the following equipment will be most economical?
a)
Initial cost Rs. 7000 Annual disbursements Rs. 2500
b)
Initial cost Rs. 5000 Annual disbursements Rs. 3500
c)
Initial cost Rs. 6000 Annual disbursements Rs. 3880
d)
Initial cost Rs. 4000 Annual disbursements Rs. 6000
46.
Sinking fund
a)
To offset the damage caused by casualties
b)
To compensate for a property's depreciation
c)
To compensate for a reduction in income
d)
To build up a reserve for future improvements
47.
Which of the following properties is NOT subjected to depreciation?
a)
Land
b)
Manufacturing machinery
c)
None of these
d)
Buildings
48.
The economic life of a building is considered to be at an end under which of the following conditions?
a)
When the building facilities become obsolete
b)
When the income from the building fails to justify its existence
c)
When the capitalization rate becomes high
d)
When the cost of repairs is more than the income
49.
Which one of the following is generally NOT the result of a good layout of an industrial plant?
a)
Reduced capital investment
b)
Increased wages
c)
Easier maintenance
d)
Reduced capital investment
50.
Which one of the following is not an incentive plan?
a)
Straight piece work
b)
Straight piece work with guaranteed base
c)
Straight salary
d)
100% bonus plan
51.
Which one of the following is NOT a job evaluation criteria?
a)
Ranking
b)
Needs of the worker
c)
Point rating
d)
Factor of comparison
52.
Which one of the following statements is NOT true about a normal distribution?
a)
It has a one mode
b)
It has a two mode
c)
The mode and the mean are equal
d)
The mean and the median are equal
53.
Injunction is
a)
A court decision
b)
A memorandum
c)
Permanent closure of a establishment
d)
Lock out of an establishment
54.
Which of the following is NOT the effective good material handling?
a)
Lower handling costs
b)
Reduced cost of production
c)
Increased labour cost
d)
All
55.
Which of the following is generally NOT the duty of the material handling department?
a)
Recommending new products
b)
Follow-up on the effectiveness of new installations
c)
Designing new equipment
d)
Survey of handling efficiency
56.
An allowance given for prompt payment is
a)
Annuity
b)
Abatement
c)
Surcharge
d)
Authority
57.
A period of reduced economic activity is called
a)
Depreciation
b)
Peer railing
c)
Recession
d)
Inflation
58.
Which of the following is a direct tax
a)
Excise duty
b)
Entertainment tax
c)
Motor vehicle licence duty
d)
All
59.
Which of the following depicts "joint demand"
a)
Airplanes and trains
b)
Ball pen and refill
c)
Magazines and newspapers
d)
All
60.
A manufacturer in Tamilnadu sells his goods in Madras. Which tax is applicable on his goods?
a)
Central sales tax
b)
State excise duty
c)
Central excise duty
d)
None of these
Reset
