The purpose of biasing is to establish a ______

If the output signal swings equally above and below the DC bias level of the output, it is called _________

___________refers to the use of signals that take up relatively small percentage of an amplifier’s operational range

An electronic circuit having the capability to amplify power, voltage or current

________ is the linking of two circuits or devices. It can be capacitive, inductive, resistive or direct

A ___________ always produces a phase inversion between the base voltage and

As the sinusoidal collector current increases, the collector voltage __________.

A transistor always produces a ____________ between the base voltage and the collector voltage in the common-emitter configuration

The key to transistor small-signal analysis is the use of the equivalent circuits or __________.

o

The ___________of a BJT transistor amplifier is purely resistive in nature

____________is determined at the output terminals looking back into the system with the applied signal set to zero.

The output impedance of a BJT transistor amplifier is __________ in nature.

•One of the most important characteristics of an amplifier is the small-signal AC _______ gain.:

For BJT amplifiers, the __________ gain typically ranges from level just less than 1 to a level that may exceed 100

in ____________ configuration input impedance is relatively small and the output impedance quite high.

What is the voltage gain of the given circuit? Beta = 100

What is Zin of the given CE amplifier? Beta = 100

What is the Zout of the CE amplifier? Beta = 100

What is the collector current of the CE amplifier? Beta = 100