wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Hydraulics and Drum Brakes

Total questions: 30

Worksheet time: 3600secs

Name
Class
Date
1.

Hydraulics are based on the concept that:

a)

Fluid is incompressible

b)

Fluid pressure is always unequal

c)

Fluid always takes the path of greatest resistance

d)

None of the above

2.

Hydraulics can increase:

a)

Force only

b)

Torque only

c)

Both Force and Torque

d)

Neither Force nor Torque

3.

Hydraulic force is created in the ______________ and transmitted through the brake lines to the wheel cylinders.

a)

Brake Pedal

b)

Master Cylinder

c)

Brake Booster

d)

Force Multiplier

4.

An advantage of using a tandem (or double) piston master cylinder is that:

a)

The vehicle will stop twice as fast

b)

The tandem cylinder makes it leak proof

c)

It is safer, a fault in one circuit will not cause complete failure

d)

All of the above

5.

Brake fluid is primarily composed of:

a)

Water

b)

Oil

c)

Molybdenum

d)

Glycol

6.

Brake fluid is hydroscopic (attracts water) which can cause:

a)

Rust in the brake system

b)

Lower boiling point in the fluid

c)

A spongy brake pedal

d)

All of these answers

7.

Brake Fluid should always come from a sealed container

a)

True

b)

False

8.

Brake fluid is universal - so long as it has a DOT number, you can use it in any car.

a)

True

b)

False

9.

A lower level of brake fluid in the reservoir is completely normal with wear of brakes.

a)

True

b)

False

10.

Drum brakes can be actuated:

a)

Mechanically

b)

Hydraulically

c)

Electrically

d)

All of these

11.

Drum brakes create a stopping action by creating friction between:

a)

Pads and Rotors

b)

Pads and Drums

c)

Shoes and Drums

d)

Shoes and Rotos

12.

One advantage of Drum Brakes is that they are __________, so they need less power to operate.

a)

Easily cooled

b)

Self energizing

c)

Simple

d)

Light

13.

Brake Fade causes a loss in drum braking due to:

a)

excessive application

b)

loss of fluid

c)

loss of brake lining

d)

too little pressure

14.

Which drum braking system is most often used on rear wheels due to its equal effectiveness in both forward and reverse?

a)

Leading - Trailing Shoe

b)

Twin Leading Shoe

c)

Duo Servo

d)

Single Leading Shoe

15.

A duo servo braking system has

a)

different sized linings on each shoe

b)

equal sized linings on each shoe

c)

no linings on any shoes

d)

pads only

16.

Most modern vehicles us a ________________ to multiply the force from the brake pedal to the master cylinder using engine vacuum.

a)

Fluid pump

b)

Brake Booster

c)

Computer system

d)

Mag drive

17.

A Park brake (or emergency brake) is a(n) _____________ type braking system

a)

Hydraulic

b)

Air

c)

Mechanical

d)

Electric

18.

Hand brakes (or foot emergency brake) provide braking action to:

a)

Front brakes only

b)

Rear brakes only

c)

All Front and Rear brakes

d)

One Front and One Rear brake

19.

If the brake system becomes contaminated with bad fluid or wrong fluid, you must:

a)

Drain the system and refill

b)

Drain and Flush with a suitable chemical, then refill

c)

Replace all the seals in the brake system

d)

Nothing - the system automatically compensates

20.

The Master Cylinder is bigger (more surface area) than the Wheel (or Power) Cylinder

a)

True

b)

False

21.
What is this part?
a)
Master cylinder
b)
Brake shoe
c)
Brake rotor
d)
Brake pump
22.

What is this part?

a)

Wheel stud

b)

Wheel cylinder

c)

Wheel bearing

d)

Starter

23.
What is this part?
a)
Pads
b)
Shoes
c)
Drums
d)
Rotors
24.
What is this part?
a)
Rotor
b)
Pads
c)
Drum
d)
Shoes
25.
What is this part?
a)
Brake hose
b)
Brake line
c)
Brake part
d)
Brake part
26.
Brake drum springs are being discussed. Technician A says the main springs on the brake shoes are meant to keep the shoes in slight contact with the drum. Technician B says the main springs purpose is to retract the shoes when the brake pedal is released. Who is correct?
a)
Technician A
b)
Technician B
c)
Both Technician A and B
d)
Neither Technician A or B
27.
What are common parts used in wheel cylinder assemblies?
a)
A. Square cut seal, piston, dust boot
b)
B. Primary and secondary piston, bleeder
c)
C. Cup seal, piston, dust boot
d)
D. Return spring, double lip seal, bleeder screw
28.
How often should you inspect your brakes?
a)
When your brakes start to squeak
b)
When you cant stop
c)
Once every 18 months
d)
Every tire rotation
29.
A vehicle stops but the brake pedal fades completely to the floorboard afterwards.There are no external leaks. Which of these is the MOST likely cause of this condition?
a)
Faulty vacuum brake booster.
b)
Clogged vacuum booster check valve.
c)
Dark discolored brake fluid.
d)
Master cylinder cup seals.
30.
A technician is lubricating rubber brake components while performing a brake job. Technician A says to use a high temperature silicon based lubricant. Technician B says to use a good petroleum based lubricant. Who is correct?
a)
Technician A only
b)
Technician B only
c)
Both Technician A and B
d)
Neither Technician A nor B